DELL PowerEdge R300ご到着

hardware pc r300

DELLのモニタープログラムに応募していたのだけれども、幸運にも DELL PowerEdge R300を貸与していただくことが出来ました。

いくつかの OSが動くか確認していきたいと思うので、しばらくだらだらと dmesgなど貼っていきたい所存

インストール自体はさっくり行く。特に問題なし。

mirror(RAID1)になっている SAS6iRも mptとしてフツーに認識されます。

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.61 (GENERIC) #0: Sun Apr 27 17:20:14 UTC 2008
	builds@b0.netbsd.org:/home/builds/ab/HEAD/amd64/200804270000Z-obj/home/builds/ab/HEAD/src/sys/arch/amd64/compile/GENERIC
total memory = 8186 MB
avail memory = 7905 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.5 @ 0xcfb9c000 (55 entries)
Dell Inc. PowerEdge R300
mainbus0 (root)
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: Intel(R) Xeon(R) CPU           L5410  @ 2.33GHz, 2333.46 MHz
cpu0: features bffbfbff
cpu0: features bffbfbff
cpu0: features bffbfbff
cpu0: features2 ce3bd
cpu0: features3 bffbfbff
cpu0: L2 cache 6 MB 64B/line 16-way
cpu0: Initial APIC ID 0
cpu0: Cluster/Package ID 0
cpu0: Core ID 0
cpu0: calibrating local timer
cpu0: apic clock running at 333 MHz
cpu0: 32 page colors
cpu1 at mainbus0 apid 1: (application processor)
cpu1: Intel(R) Xeon(R) CPU           L5410  @ 2.33GHz, 2333.43 MHz
cpu1: features bffbfbff
cpu1: features bffbfbff
cpu1: features bffbfbff
cpu1: features2 ce3bd
cpu1: features3 bffbfbff
cpu1: L2 cache 6 MB 64B/line 16-way
cpu1: Initial APIC ID 1
cpu1: Cluster/Package ID 0
cpu1: Core ID 1
cpu2 at mainbus0 apid 2: (application processor)
cpu2: Intel(R) Xeon(R) CPU           L5410  @ 2.33GHz, 2333.47 MHz
cpu2: features bffbfbff
cpu2: features bffbfbff
cpu2: features bffbfbff
cpu2: features2 ce3bd
cpu2: features3 bffbfbff
cpu2: L2 cache 6 MB 64B/line 16-way
cpu2: Initial APIC ID 2
cpu2: Cluster/Package ID 0
cpu2: Core ID 2
cpu3 at mainbus0 apid 3: (application processor)
cpu3: Intel(R) Xeon(R) CPU           L5410  @ 2.33GHz, 2333.50 MHz
cpu3: features bffbfbff
cpu3: features bffbfbff
cpu3: features bffbfbff
cpu3: features2 ce3bd
cpu3: features3 bffbfbff
cpu3: L2 cache 6 MB 64B/line 16-way
cpu3: Initial APIC ID 3
cpu3: Cluster/Package ID 0
cpu3: Core ID 3
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20080321
acpi0: X/RSDT: OemId , AslId 
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU2 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU3 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU4 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
WHEA (PNP0C33) at acpi0 not configured
PCI0 (PNP0A03) [PCI/PCI-X Host Bridge] at acpi0 not configured
DMA (PNP0200) [AT DMA Controller] at acpi0 not configured
FPU (PNP0C04) [Math Coprocessor] at acpi0 not configured
PIC (PNP0000) [AT Interrupt Controller] at acpi0 not configured
SPK (PNP0C01) [System Board] at acpi0 not configured
RTC (PNP0B00) [AT Real-Time Clock] at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x5f irq 0
COMA (PNP0501) [16550A-compatible COM port] at acpi0 not configured
COMB (PNP0501) [16550A-compatible COM port] at acpi0 not configured
MBIO (PNP0C01) [System Board] at acpi0 not configured
NIPM (IPI0001) at acpi0 not configured
PEHB (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not configured
hpet0 at acpi0 (HPET, PNP0103-0)
hpet0: mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
LK00 (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LK01 (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LK03 (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LK04 (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LK05 (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LK06 (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LK07 (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x65c0 (rev. 0x90)
ppb0 at pci0 dev 2 function 0: Intel product 0x65f7 (rev. 0x90)
pci1 at ppb0 bus 3
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 3 function 0: Intel product 0x65e3 (rev. 0x90)
pci2 at ppb1 bus 4
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 4 function 0: Intel product 0x65f8 (rev. 0x90)
pci3 at ppb2 bus 5
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
mpt0 at pci3 dev 0 function 0: Symbios Logic SAS1068E
mpt0: interrupting at ioapic0 pin 16 (irq 15)
mpt0: Phy 0: Link Rate 3.0 Gbps
mpt0: Phy 1: Link Rate 3.0 Gbps
mpt0: Unknown async event: 0xb
scsibus0 at mpt0: 112 targets, 8 luns per target
ppb3 at pci0 dev 5 function 0: Intel product 0x65e5 (rev. 0x90)
pci4 at ppb3 bus 6
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 6 function 0: Intel product 0x65f9 (rev. 0x90)
pci5 at ppb4 bus 7
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci5 dev 0 function 0: Intel PRO/1000 PT (82571EB), rev. 6
wm0: interrupting at ioapic0 pin 16 (irq 15)
wm0: PCI-Express bus
wm0: 65536 word (16 address bits) SPI EEPROM
wm0: Ethernet address 00:15:17:74:5c:5e
igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wm1 at pci5 dev 0 function 1: Intel PRO/1000 PT (82571EB), rev. 6
wm1: interrupting at ioapic0 pin 17 (irq 14)
wm1: PCI-Express bus
wm1: 65536 word (16 address bits) SPI EEPROM
wm1: Ethernet address 00:15:17:74:5c:5f
igphy1 at wm1 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb5 at pci0 dev 7 function 0: Intel product 0x65e7 (rev. 0x90)
pci6 at ppb5 bus 8
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
pchb1 at pci0 dev 16 function 0
pchb1: Intel product 0x65f0 (rev. 0x90)
pchb2 at pci0 dev 16 function 1
pchb2: Intel product 0x65f0 (rev. 0x90)
pchb3 at pci0 dev 16 function 2
pchb3: Intel product 0x65f0 (rev. 0x90)
pchb4 at pci0 dev 17 function 0
pchb4: Intel product 0x65f1 (rev. 0x90)
pchb5 at pci0 dev 19 function 0
pchb5: Intel product 0x65f3 (rev. 0x90)
pchb6 at pci0 dev 21 function 0
pchb6: Intel product 0x65f5 (rev. 0x90)
pchb7 at pci0 dev 22 function 0
pchb7: Intel product 0x65f6 (rev. 0x90)
ppb6 at pci0 dev 28 function 0: Intel 82801I PCI Express Port #1 (rev. 0x02)
pci7 at ppb6 bus 9
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
ppb7 at pci0 dev 28 function 4: Intel 82801I PCI Express Port #5 (rev. 0x02)
pci8 at ppb7 bus 1
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
Broadcom BCM5722 NetXtreme 1000baseT Ethernet (ethernet network) at pci8 dev 0 function 0 not configured
ppb8 at pci0 dev 28 function 5: Intel 82801I PCI Express Port #6 (rev. 0x02)
pci9 at ppb8 bus 2
pci9: i/o space, memory space enabled, rd/line, wr/inv ok
Broadcom BCM5722 NetXtreme 1000baseT Ethernet (ethernet network) at pci9 dev 0 function 0 not configured
uhci0 at pci0 dev 29 function 0: Intel 82801I USB UHCI Controller (rev. 0x02)
uhci0: interrupting at ioapic0 pin 21 (irq 11)
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: Intel 82801I USB UHCI Controller (rev. 0x02)
uhci1: interrupting at ioapic0 pin 20 (irq 10)
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: Intel 82801I USB UHCI Controller (rev. 0x02)
uhci2: interrupting at ioapic0 pin 21 (irq 11)
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 29 function 7: Intel 82801I USB EHCI Controller (rev. 0x02)
ehci0: interrupting at ioapic0 pin 21 (irq 11)
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
ppb9 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0x92)
pci10 at ppb9 bus 10
pci10: i/o space, memory space enabled
vga0 at pci10 dev 7 function 0: ATI Technologies ES1000 (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
direct rendering for vga0 unsupported
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801IR LPC Interface Bridge (rev. 0x02)
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801I Serial ATA Controller (ICH9) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to native-PCI mode
piixide0: using ioapic0 pin 23 (irq 6) for native-PCI interrupt
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to native-PCI mode
atabus1 at piixide0 channel 1
piixide1 at pci0 dev 31 function 5
piixide1: Intel 82801I Serial ATA Controller (ICH9) (rev. 0x02)
piixide1: bus-master DMA support present
piixide1: primary channel wired to native-PCI mode
piixide1: using ioapic0 pin 22 (irq 5) for native-PCI interrupt
atabus2 at piixide1 channel 0
piixide1: secondary channel wired to native-PCI mode
atabus3 at piixide1 channel 1
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
attimer1: attached to pcppi0
mpt0: Unknown async event: 0x21
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
scsibus0: waiting 2 seconds for devices to settle...
atapibus0 at atabus0: 2 targets
uhub0 at usb0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
cd0 at atapibus0 drive 1:  cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
ugen0 at uhub3 port 4
ugen0: Melco product 0x006e, rev 2.00/0.01, addr 2
udav0 at uhub1 port 1
udav0: corega K.K. corega FEther USB-TXC, rev 1.10/1.01, addr 2
sd0 at scsibus0 target 0 lun 0:  disk fixed
sd0: 68664 MB, 68664 cyl, 16 head, 128 sec, 512 bytes/sect x 140623872 sectors
udav0: Ethernet address 00:0a:79:b1:59:46
ukphy0 at udav0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000676, model 0x000c, rev. 0
probe(mpt0:0:8:0): generic HBA error
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
uhub4 at uhub3 port 5: Cypress Semiconductor USB2 Hub, class 9/0, rev 2.00/90.15, addr 3
uhub4: single transaction translator
uhub4: 2 ports with 2 removable, self powered
uhidev0 at uhub4 port 2 configuration 1 interface 0
uhidev0: Dell Dell USB Keyboard, rev 1.10/2.00, addr 4, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

電力計るために

サンワサプライ TAP-TST5 ワットチェッカー

サンワサプライ TAP-TST5 ワットチェッカー

を買うか……。