生活用サーバお引っ越し

memo hardware server
  • 新しいマシンに OS入れる
  • ホームディレクトリの主要なところを SCPでコピー
  • apache等を入れてブラウザからポチポチ出来る環境をセットアップ
  • wiki等のコンテンツマネージシステムを立ち上げる
  • apt,cpan等で必要なパッケージをごりごり入れる

という感じでちょびちょび作業中。CPANで必要なパッケージ入れるのが意外に時間かかるな。

  • fswikiがどーしても動かなかったのでバージョンうｐした。


データロストも無かったし、サービス停止も 1時間くらいで済んだのでこんなもんかのう。

マシンを転がして置くときはテキトーな OS入れて何ヶ月かに一回アップデートしておくとサービス投入が早くて良いな、と思った。


Debian GNU/Linux Kernel Version 2.6.25-2-686にしたのだが、dmesgに時刻が打刻されるようになってとても便利になった。
2.6.12あたりから追加された CONFIG_PRINTK_TIMEという fuatureらしいが、これが Debian的には最近の Kernel packageで enableされたってことかな。

頭がnazeか切れてるが、以下は今日の dmesg

SiI680ってのがイマイチ命かけるには不安だな。
3ware Escalade 8006-2LPあたりを買ってきて、フェイクじゃない本当のミラーにするのがいいのかのう。

[rakuten:pcexpress-mobile:10066438:detail]

[ 1.112082] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.112090] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.112344] mice: PS/2 mouse device common for all mice
[ 1.112422] cpuidle: using governor ladder
[ 1.112425] cpuidle: using governor menu
[ 1.113021] TCP cubic registered
[ 1.113034] NET: Registered protocol family 1
[ 1.113048] NET: Registered protocol family 17
[ 1.113056] Using IPI No-Shortcut mode
[ 1.113250] registered taskstats version 1
[ 1.113513] Freeing unused kernel memory: 252k freed
[ 0.918392] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.181892] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.181984] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.086568] tg3.c:v3.91 (April 18, 2008)
[ 1.086590] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 1.086601] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 1.104958] eth0: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:15:c5:60:bc:f8
[ 1.104963] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1]
[ 1.104966] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.104994] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 1.105005] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 1.124986] eth1: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:15:c5:60:bc:f9
[ 1.124991] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1]
[ 1.124994] eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.167844] Uniform Multi-Platform E-IDE driver
[ 1.167850] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.169455] SiI680: IDE controller (0x1095:0x0680 rev 0x02) at PCI slot 0000:04:07.0
[ 1.169480] ACPI: PCI Interrupt 0000:04:07.0[A] -> GSI 32 (level, low) -> IRQ 32
[ 1.169508] SiI680: BASE CLOCK == 133
[ 1.169511] SiI680: 100% native mode on irq 32
[ 1.169517] ide0: MMIO-DMA , BIOS settings: hda:PIO, hdb:PIO
[ 1.169527] ide1: MMIO-DMA , BIOS settings: hdc:PIO, hdd:PIO
[ 1.169534] Probing IDE interface ide0...
[ 1.196809] usbcore: registered new interface driver usbfs
[ 1.196838] usbcore: registered new interface driver hub
[ 1.196875] usbcore: registered new device driver usb
[ 1.198057] USB Universal Host Controller Interface driver v3.0
[ 1.198095] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 1.198104] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 1.198108] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.198196] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.198224] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bce0
[ 1.198353] usb usb1: configuration #1 chosen from 1 choice
[ 1.198381] hub 1-0:1.0: USB hub found
[ 1.198388] hub 1-0:1.0: 2 ports detected
[ 1.237086] No dock devices found.
[ 1.245701] SCSI subsystem initialized
[ 1.506807] Floppy drive(s): fd0 is 1.44M
[ 1.281899] libata version 3.00 loaded.
[ 1.300207] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.300213] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.300216] usb usb1: Product: UHCI Host Controller
[ 1.300224] usb usb1: Manufacturer: Linux 2.6.25-2-686 uhci_hcd
[ 1.300226] usb usb1: SerialNumber: 0000:00:1d.0
[ 1.300263] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 1.300274] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 1.300278] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.300307] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 1.300337] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bcc0
[ 1.300455] usb usb2: configuration #1 chosen from 1 choice
[ 1.300484] hub 2-0:1.0: USB hub found
[ 1.300492] hub 2-0:1.0: 2 ports detected
[ 1.336172] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.336176] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.336179] usb usb2: Product: UHCI Host Controller
[ 1.336182] usb usb2: Manufacturer: Linux 2.6.25-2-686 uhci_hcd
[ 1.336185] usb usb2: SerialNumber: 0000:00:1d.1
[ 1.336216] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
[ 1.336230] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 1.336233] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.336257] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 1.336284] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bca0
[ 1.336396] usb usb3: configuration #1 chosen from 1 choice
[ 1.336423] hub 3-0:1.0: USB hub found
[ 1.336430] hub 3-0:1.0: 2 ports detected
[ 1.360179] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.360183] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.360187] usb usb3: Product: UHCI Host Controller
[ 1.360189] usb usb3: Manufacturer: Linux 2.6.25-2-686 uhci_hcd
[ 1.360192] usb usb3: SerialNumber: 0000:00:1d.2
[ 1.548102] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[ 1.548102] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 1.548102] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.548102] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 1.548249] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.548255] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 1.548262] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdff00400
[ 1.376112] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 1.560114] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.560241] usb usb4: configuration #1 chosen from 1 choice
[ 1.560270] hub 4-0:1.0: USB hub found
[ 1.560277] hub 4-0:1.0: 6 ports detected
[ 1.576142] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 1.580198] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.580201] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.580203] usb usb4: Product: EHCI Host Controller
[ 1.580205] usb usb4: Manufacturer: Linux 2.6.25-2-686 ehci_hcd
[ 1.580207] usb usb4: SerialNumber: 0000:00:1d.7
[ 1.616126] hub 4-0:1.0: unable to enumerate USB device on port 1
[ 1.424672] hda: VIRTUALFLOPPY DRIVE Floppy, ATAPI FLOPPY drive
[ 1.472108] usb 1-1: new full speed USB device using uhci_hcd and address 3
[ 1.636107] usb 1-1: configuration #1 chosen from 1 choice
[ 1.636107] usb 1-1: New USB device found, idVendor=413c, idProduct=2500
[ 1.636107] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.636107] usb 1-1: Product: DRAC4
[ 1.636107] usb 1-1: Manufacturer: Dell
[ 1.636107] usb 1-1: SerialNumber: 0000000
[ 1.524676] hdb: VIRTUALCDROM DRIVE, ATAPI CD/DVD-ROM drive
[ 1.528131] hda: applying conservative PIO "downgrade"
[ 1.528135] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO2
[ 1.528142] hdb: applying conservative PIO "downgrade"
[ 1.528169] hda: applying conservative PIO "downgrade"
[ 1.528172] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO2
[ 1.528179] hdb: applying conservative PIO "downgrade"
[ 1.528202] hdb: applying conservative PIO "downgrade"
[ 1.528205] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO2
[ 1.528212] hda: applying conservative PIO "downgrade"
[ 1.528240] hdb: applying conservative PIO "downgrade"
[ 1.528242] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO2
[ 1.528247] hda: applying conservative PIO "downgrade"
[ 1.528266] Probing IDE interface ide1...
[ 1.592124] ide0 at 0xf8810c80-0xf8810c87,0xf8810c8a on irq 32
[ 1.599193] ICH7: IDE controller (0x8086:0x27df rev 0x01) at PCI slot 0000:00:1f.1
[ 1.599202] ACPI: Unable to derive IRQ for device 0000:00:1f.1
[ 1.599208] ICH7: not 100% native mode: will probe irqs later
[ 1.599217] ICH7: IDE port disabled
[ 1.599222] ide2: BM-DMA at 0xfc00-0xfc07, BIOS settings: hde:DMA, hdf:PIO
[ 1.599231] Probing IDE interface ide2...
[ 1.623221] ide-floppy driver 1.00
[ 1.732128] usbcore: registered new interface driver hiddev
[ 1.740114] hda: Invalid capacity for disk in drive
[ 1.740114] input: Dell DRAC4 as /class/input/input1
[ 1.740114] input,hidraw0: USB HID v1.10 Keyboard [Dell DRAC4] on usb-0000:00:1d.0-1
[ 1.752115] input: Dell DRAC4 as /class/input/input2
[ 1.752115] input,hidraw1: USB HID v1.10 Mouse [Dell DRAC4] on usb-0000:00:1d.0-1
[ 1.752115] usbcore: registered new interface driver usbhid
[ 1.752115] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 1.767783] Uniform CD-ROM driver Revision: 3.20
[ 1.776332] hde: HL-DT-ST DVD-ROM GDR-8084N, ATAPI CD/DVD-ROM drive
[ 1.832153] hde: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 1.836141] hde: UDMA/33 mode selected
[ 1.837142] ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 1.840120] hde: ATAPI 24X DVD-ROM drive, 2048kB Cache
[ 1.840120] ata_piix 0000:00:1f.2: version 2.12
[ 1.840120] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 20
[ 1.840120] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.860122] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 1.860122] scsi0 : ata_piix
[ 1.860122] scsi1 : ata_piix
[ 1.860122] ata1: SATA max UDMA/133 cmd 0xbc98 ctl 0xbc90 bmdma 0xbc60 irq 20
[ 1.860122] ata2: SATA max UDMA/133 cmd 0xbc80 ctl 0xbc78 bmdma 0xbc68 irq 20
[ 1.856143] floppy0: no floppy controllers found
[ 1.868122] ata1.00: ATA-7: ST3160812AS, 3.ADH, max UDMA/133
[ 1.868122] ata1.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 1.884123] ata1.00: configured for UDMA/133
[ 1.896124] ata2.00: ATA-7: ST3160812AS, 3.ADH, max UDMA/133
[ 1.896124] ata2.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 1.912125] ata2.00: configured for UDMA/133
[ 1.888124] scsi 0:0:0:0: Direct-Access ATA ST3160812AS 3.AD PQ: 0 ANSI: 5
[ 1.888124] scsi 1:0:0:0: Direct-Access ATA ST3160812AS 3.AD PQ: 0 ANSI: 5
[ 1.922724] Driver 'sd' needs updating - please use bus_type methods
[ 1.923510] sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
[ 1.923533] sd 0:0:0:0: [sda] Write Protect is off
[ 1.923536] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.923574] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.923646] sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
[ 1.923773] sd 0:0:0:0: [sda] Write Protect is off
[ 1.923777] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.923811] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.923815] sda: sda1 sda2 sda3 sda4
[ 1.943362] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.943984] sd 1:0:0:0: [sdb] 312500000 512-byte hardware sectors (160000 MB)
[ 1.944003] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.944006] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.944037] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.944093] sd 1:0:0:0: [sdb] 312500000 512-byte hardware sectors (160000 MB)
[ 1.944110] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.944132] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.944165] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.944168] sdb: sdb1
[ 1.952128] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.996289] PM: Starting manual resume from disk
[ 2.016132] kjournald starting. Commit interval 5 seconds
[ 2.052134] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.400869] udevd version 124 started
[ 2.715116] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 2.855032] EDAC MC: Ver: 2.1.0 Jul 18 2008
[ 2.912405] input: Power Button (FF) as /class/input/input3
[ 2.914614] EDAC MC0: Giving out device to 'i3000_edac' 'i3000': DEV 0000:00:00.0
[ 2.914641] EDAC PCI0: Giving out device to module 'i3000_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)
[ 2.952240] ACPI: Power Button (FF) [PWRF]
[ 3.060077] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.136984] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.206278] input: PC Speaker as /class/input/input4
[ 3.302413] intel_rng: FWH not detected
[ 3.302992] ACPI: Unable to derive IRQ for device 0000:00:1f.3
[ 3.302996] ACPI: PCI Interrupt 0000:00:1f.3[B]: no GSI
[ 3.353034] Floppy drive(s): fd0 is 1.44M
[ 3.356334] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 3.356364] rtc0: alarms up to one day
[ 3.417435] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 3.464224] input: ImPS/2 Logitech Wheel Mouse as /class/input/input5
[ 3.464224] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[ 3.464224] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.608253] floppy0: no floppy controllers found
[ 3.833359] Adding 4883752k swap on /dev/sda3. Priority:-1 extents:1 across:4883752k
[ 3.904826] EXT3 FS on sda2, internal journal
[ 4.068263] loop: module loaded
[ 4.260275] kjournald starting. Commit interval 5 seconds
[ 4.264406] EXT3 FS on sdb1, internal journal
[ 4.264413] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.268276] kjournald starting. Commit interval 5 seconds
[ 4.268276] EXT3 FS on sda4, internal journal
[ 4.268276] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.570982] NET: Registered protocol family 10
[ 5.571567] lo: Disabled Privacy Extensions
[ 5.572200] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.879225] tg3: eth0: Link is up at 1000 Mbps, full duplex.
[ 5.879234] tg3: eth0: Flow control is off for TX and off for RX.
[ 5.879361] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 137.401385] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 188.273510] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 169.960330] device eth0 entered promiscuous mode
[ 170.265860] device eth0 left promiscuous mode
[ 227.978469] device eth0 entered promiscuous mode
[ 170.776395] device eth0 left promiscuous mode