T105二台目

オーダーウォッチの予定通り 10月10日に納品された。
Debian入れて OSアップデートして、diagしかけて帰ったら、固まっていた……。
エラー出れば「しょーがねーな」と思うけど、固まられると困る。

BIOS updater for Linux的なものを Debianで使ったら、素直にアップデートされて感動した。前はそもそもアップデータが起動しなかったり、アップデータが起動しても刺さってbios飛んじゃうとかいろいろあったからな……。


どーでもいいが、PowreEdge T105って「power on when power recovery」的なオプションないか。しょーもねえな。


以下dmesg(前のと代わり映えしない)

Dell PowerEdge T105, Linux version 2.6.26-1-amd64 (Debian 2.6.26-8)

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-amd64 (Debian 2.6.26-8) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Oct 9 14:16:53 UTC 2008
[ 0.000000] Command line: root=/dev/sda3 ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ca000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
[ 0.000000] BIOS-e820: 000000003fee0000 - 000000003fee5000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fee5000 - 000000003ff7f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 261856) 1 entries of 3200 used
[ 0.000000] max_pfn_mapped = 1048576
[ 0.000000] init_memory_mapping
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F79B0, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT 3FEE077B, 009C (r1 DELL PE_SC3 6040000 DELL 0)
[ 0.000000] ACPI: FACP 3FEE3C87, 00F4 (r3 DELL PE_SC3 6040000 DELL F4240)
[ 0.000000] ACPI: DSDT 3FEE0817, 33FC (r1 DELL PE_SC3 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3FEE5FC0, 0040
[ 0.000000] ACPI: TCPA 3FEE3D7B, 0032 (r1 Phoeni x 6040000 TL 0)
[ 0.000000] ACPI: SLIC 3FEE3DAD, 0024 (r1 DELL PE_SC3 6040000 PTL 1)
[ 0.000000] ACPI: SPCR 3FEE3DD1, 0050 (r1 DELL PE_SC3 6040000 PTL 1)
[ 0.000000] ACPI: EINJ 3FEE3E21, 01B0 (r1 PTL WHEAPTL 6040000 PTL 1)
[ 0.000000] ACPI: HEST 3FEE3FD1, 00A8 (r1 PTL WHEAPTL 6040000 PTL 1)
[ 0.000000] ACPI: BERT 3FEE4079, 0030 (r1 PTL WHEAPTL 6040000 PTL 1)
[ 0.000000] ACPI: SSDT 3FEE40A9, 00E1 (r1 wheaos wheaosc 6040000 INTL 20050624)
[ 0.000000] ACPI: ERST 3FEE418A, 0270 (r1 PTL WHEAPTL 6040000 PTL 1)
[ 0.000000] ACPI: SRAT 3FEE43FA, 00C0 (r1 AMD HAMMER 6040000 AMD 1)
[ 0.000000] ACPI: SSDT 3FEE44BA, 0A30 (r1 AMD POWERNOW 6040000 AMD 1)
[ 0.000000] ACPI: MCFG 3FEE4EEA, 003C (r1 PTLTD MCFG 6040000 LTP 0)
[ 0.000000] ACPI: HPET 3FEE4F26, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
[ 0.000000] ACPI: APIC 3FEE4F5E, 007A (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 3FEE4FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 2 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 3 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] SRAT: Node 0 PXM 0 100000-40000000
[ 0.000000] Entering add_active_range(0, 256, 261856) 1 entries of 3200 used
[ 0.000000] NUMA: Allocated memnodemap from b000 - b880
[ 0.000000] NUMA: Using 20 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003fee0000
[ 0.000000] NODE_DATA [000000000000b880 - 000000000001087f]
[ 0.000000] bootmap [0000000000011000 - 0000000000018fdf] pages 8
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
[ 0.000000] early res: 2 [200000-673397] TEXT DATA BSS
[ 0.000000] early res: 3 [379da000-37fef305] RAMDISK
[ 0.000000] early res: 4 [9dc00-fffff] BIOS reserved
[ 0.000000] early res: 5 [8000-afff] PGTABLE
[ 0.000000] early res: 6 [b000-b87f] MEMNODEMAP
[ 0.000000] [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff810001200000-ffff810001ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 157
[ 0.000000] 0: 256 -> 261856
[ 0.000000] On node 0 totalpages: 261757
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1245 pages reserved
[ 0.000000] DMA zone: 2696 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3525 pages used for memmap
[ 0.000000] DMA32 zone: 254235 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ca000
[ 0.000000] PM: Registered nosave memory: 00000000000ca000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 4
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 256931
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda3 ro
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000000] time.c: Detected 2109.722 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] Node 0: aperture @ eb90000000 size 32 MB
[ 0.004000] Aperture beyond 4GB. Ignoring.
[ 0.004000] No AGP bridge found
[ 0.004000] Memory: 1021568k/1047424k available (2225k kernel code, 25460k reserved, 1079k data, 392k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.083928] Calibrating delay using timer specific routine.. 4222.10 BogoMIPS (lpj=8444216)
[ 0.084005] Security Framework initialized
[ 0.084005] SELinux: Disabled at boot.
[ 0.084005] Capability LSM initialized
[ 0.084005] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.084005] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.084005] Mount-cache hash table entries: 256
[ 0.084005] Initializing cgroup subsys ns
[ 0.084005] Initializing cgroup subsys cpuacct
[ 0.084005] Initializing cgroup subsys devices
[ 0.084005] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.084005] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.084005] CPU 0/0 -> Node 0
[ 0.084005] CPU: Physical Processor ID: 0
[ 0.084005] CPU: Processor Core ID: 0
[ 0.084005] ACPI: Core revision 20080321
[ 0.133244] CPU0: Quad-Core AMD Opteron(tm) Processor 1352 stepping 03
[ 0.133332] Using local APIC timer interrupts.
[ 0.140008] APIC timer calibration result 12557845
[ 0.140008] Detected 12.557 MHz APIC timer.
[ 0.140008] Booting processor 1/1 ip 6000
[ 0.148009] Initializing CPU#1
[ 0.148009] Calibrating delay using timer specific routine.. 4219.70 BogoMIPS (lpj=8439417)
[ 0.148009] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.148009] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.148009] CPU 1/1 -> Node 0
[ 0.148009] CPU: Physical Processor ID: 0
[ 0.148009] CPU: Processor Core ID: 1
[ 0.228014] CPU1: Quad-Core AMD Opteron(tm) Processor 1352 stepping 03
[ 0.228014] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.232014] Booting processor 2/2 ip 6000
[ 0.240015] Initializing CPU#2
[ 0.240015] Calibrating delay using timer specific routine.. 4219.59 BogoMIPS (lpj=8439180)
[ 0.240015] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.240015] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.240015] CPU 2/2 -> Node 0
[ 0.240015] CPU: Physical Processor ID: 0
[ 0.240015] CPU: Processor Core ID: 2
[ 0.319431] CPU2: Quad-Core AMD Opteron(tm) Processor 1352 stepping 03
[ 0.319820] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.324020] Booting processor 3/3 ip 6000
[ 0.332020] Initializing CPU#3
[ 0.332020] Calibrating delay using timer specific routine.. 4219.56 BogoMIPS (lpj=8439128)
[ 0.332020] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.332020] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.332020] CPU 3/3 -> Node 0
[ 0.332020] CPU: Physical Processor ID: 0
[ 0.332020] CPU: Processor Core ID: 3
[ 0.411467] CPU3: Quad-Core AMD Opteron(tm) Processor 1352 stepping 03
[ 0.411856] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.416026] Brought up 4 CPUs
[ 0.416026] Total of 4 processors activated (16880.97 BogoMIPS).
[ 0.416026] CPU0 attaching sched-domain:
[ 0.416026] domain 0: span 0-3
[ 0.416026] groups: 0 1 2 3
[ 0.416026] domain 1: span 0-3
[ 0.416026] groups: 0-3
[ 0.416026] CPU1 attaching sched-domain:
[ 0.416026] domain 0: span 0-3
[ 0.416026] groups: 1 2 3 0
[ 0.416026] domain 1: span 0-3
[ 0.416026] groups: 0-3
[ 0.416026] CPU2 attaching sched-domain:
[ 0.416026] domain 0: span 0-3
[ 0.416026] groups: 2 3 0 1
[ 0.416026] domain 1: span 0-3
[ 0.416026] groups: 0-3
[ 0.416026] CPU3 attaching sched-domain:
[ 0.416026] domain 0: span 0-3
[ 0.416026] groups: 3 0 1 2
[ 0.416026] domain 1: span 0-3
[ 0.416026] groups: 0-3
[ 0.416026] net_namespace: 1224 bytes
[ 0.416026] Booting paravirtualized kernel on bare hardware
[ 0.416026] NET: Registered protocol family 16
[ 0.416026] node 0 link 0: io port [1000, 3fff]
[ 0.416026] node 0 link 0: io port [4000, fffff]
[ 0.416026] TOM: 0000000040000000 aka 1024M
[ 0.416026] node 0 link 0: mmio [d0000000, d04fffff]
[ 0.416026] node 0 link 0: mmio [fed00000, fed0ffff]
[ 0.416026] node 0 link 0: mmio [d8000000, dfffffff]
[ 0.416026] node 0 link 0: mmio [fec00000, fec0ffff]
[ 0.416026] node 0 link 0: mmio [e0000000, efffffff]
[ 0.416026] node 0 link 0: mmio [a0000, bffff]
[ 0.416026] node 0 link 0: mmio [f0000000, fe0bffff]
[ 0.416026] bus: [00,ff] on node 0 link 0
[ 0.416026] bus: 00 index 0 io port: [0, ffff]
[ 0.416026] bus: 00 index 1 mmio: [40000000, d7ffffff]
[ 0.416026] bus: 00 index 2 mmio: [fec10000, fcffffffff]
[ 0.416026] bus: 00 index 3 mmio: [d8000000, febfffff]
[ 0.416026] bus: 00 index 4 mmio: [fec00000, fec0ffff]
[ 0.416026] bus: 00 index 5 mmio: [a0000, bffff]
[ 0.416026] ACPI: bus type pci registered
[ 0.416026] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 4
[ 0.416026] PCI: MCFG area at e0000000 reserved in E820
[ 0.416026] PCI: Using MMCONFIG at e0000000 - e04fffff
[ 0.416026] PCI: Using configuration type 1 for base access
[ 0.416403] ACPI: EC: Look up EC in DSDT
[ 0.420152] ACPI: Interpreter enabled
[ 0.420194] ACPI: (supports S0 S4 S5)
[ 0.420304] ACPI: Using IOAPIC for interrupt routing
[ 0.428026] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.428026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.428026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 0.428026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
[ 0.428026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
[ 0.428026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
[ 0.428026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR3._PRT]
[ 0.448731] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0
[ 0.448731] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0
[ 0.452731] ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0, disabled.
[ 0.452731] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0, disabled.
[ 0.452731] ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled.
[ 0.453115] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0
[ 0.453467] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0
[ 0.456733] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0, disabled.
[ 0.457114] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[ 0.457495] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[ 0.457888] ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled.
[ 0.458268] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled.
[ 0.458655] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0
[ 0.459021] ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0
[ 0.459398] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 0.463638] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.463638] pnp: PnP ACPI init
[ 0.463638] ACPI: bus type pnp registered
[ 0.463638] pnp 00:00: parse allocated resources
[ 0.463638] pnp 00:00: add mem 0xffc00000-0xffffffff flags 0x0
[ 0.463638] pnp 00:00: add mem 0xfec00000-0xfec00fff flags 0x1
[ 0.463638] pnp 00:00: add mem 0xfee00000-0xfeefffff flags 0x1
[ 0.463638] pnp 00:00: add mem 0xfed00000-0xfed00fff flags 0x1
[ 0.463638] pnp 00:00: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
[ 0.463638] pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.463638] pnp 00:01: parse allocated resources
[ 0.463638] pnp 00:01: add io 0xcf8-0xcff flags 0x1
[ 0.463638] pnp 00:01: add mem 0xfed40000-0xfed8ffff flags 0x1
[ 0.463638] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.463638] pnp 00:02: parse allocated resources
[ 0.463638] pnp 00:02: add mem 0xe0000000-0xefffffff flags 0x1
[ 0.463638] pnp 00:02: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.463638] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.463638] pnp 00:03: parse allocated resources
[ 0.463638] pnp 00:03: add io 0x8000-0x807f flags 0x1
[ 0.463638] pnp 00:03: add io 0x8080-0x80ff flags 0x1
[ 0.463638] pnp 00:03: add io 0x8400-0x847f flags 0x1
[ 0.463638] pnp 00:03: add io 0x8480-0x84ff flags 0x1
[ 0.463638] pnp 00:03: add io 0x8800-0x887f flags 0x1
[ 0.463638] pnp 00:03: add io 0x8880-0x88ff flags 0x1
[ 0.463638] pnp 00:03: add io 0x2040-0x207f flags 0x1
[ 0.463638] pnp 00:03: add io 0x2000-0x203f flags 0x1
[ 0.463638] pnp 00:03: add io 0x60-0x60 flags 0x1
[ 0.463638] pnp 00:03: add io 0x64-0x64 flags 0x1
[ 0.463638] pnp 00:03: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.463638] pnp 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.463638] pnp 00:04: parse allocated resources
[ 0.463638] pnp 00:04: add irq 8 flags 0x1
[ 0.463638] pnp 00:04: add mem 0xfed00000-0xfed003ff flags 0x0
[ 0.463638] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.463638] pnp 00:05: parse allocated resources
[ 0.463638] pnp 00:05: add io 0x10-0x1f flags 0x1
[ 0.463638] pnp 00:05: add io 0x22-0x3f flags 0x1
[ 0.463638] pnp 00:05: add io 0x44-0x5f flags 0x1
[ 0.463638] pnp 00:05: add io 0x62-0x63 flags 0x1
[ 0.463638] pnp 00:05: add io 0x65-0x6f flags 0x1
[ 0.463638] pnp 00:05: add io 0x72-0x73 flags 0x1
[ 0.463638] pnp 00:05: add io 0x74-0x7f flags 0x1
[ 0.463638] pnp 00:05: add io 0x91-0x93 flags 0x1
[ 0.463638] pnp 00:05: add io 0x97-0x9f flags 0x1
[ 0.463638] pnp 00:05: add io 0xa2-0xbf flags 0x1
[ 0.463638] pnp 00:05: add io 0xe0-0xef flags 0x1
[ 0.463638] pnp 00:05: add io 0x4d0-0x4d1 flags 0x1
[ 0.463638] pnp 00:05: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.463638] pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.463638] pnp 00:06: parse allocated resources
[ 0.463638] pnp 00:06: add io 0x0-0x8 flags 0x1
[ 0.463638] pnp 00:06: add io 0xa-0xf flags 0x1
[ 0.463638] pnp 00:06: add io 0x81-0x83 flags 0x1
[ 0.463638] pnp 00:06: add io 0x87-0x87 flags 0x1
[ 0.463638] pnp 00:06: add io 0x89-0x8b flags 0x1
[ 0.463638] pnp 00:06: add io 0x8f-0x8f flags 0x1
[ 0.463638] pnp 00:06: add io 0xc0-0xd1 flags 0x1
[ 0.463638] pnp 00:06: add io 0xd4-0xdf flags 0x1
[ 0.463638] pnp 00:06: add dma 4 flags 0x4
[ 0.463638] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.463638] pnp 00:07: parse allocated resources
[ 0.463638] pnp 00:07: add io 0x61-0x61 flags 0x1
[ 0.463638] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.463638] pnp 00:08: parse allocated resources
[ 0.463638] pnp 00:08: add io 0x70-0x71 flags 0x1
[ 0.463638] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.463638] pnp 00:09: parse allocated resources
[ 0.463638] pnp 00:09: add io 0xf0-0xf1 flags 0x1
[ 0.463638] pnp 00:09: add irq 13 flags 0x1
[ 0.463638] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.463638] pnp 00:0a: parse allocated resources
[ 0.463638] pnp 00:0a: add io 0xc00-0xc7f flags 0x1
[ 0.463638] pnp 00:0a: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.463638] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.463638] pnp 00:0b: parse allocated resources
[ 0.463638] pnp 00:0b: add io 0x3f8-0x3ff flags 0x1
[ 0.463638] pnp 00:0b: add irq 4 flags 0x1
[ 0.463638] pnp 00:0b: parse resource options
[ 0.463638] pnp 00:0b: new independent option
[ 0.463638] pnp 00:0b: new dependent option (priority 0x0)
[ 0.463638] pnp 00:0b: io min 0x3f8 max 0x3f8 align 8 size 8 flags 0x1
[ 0.463638] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
[ 0.463638] pnp 00:0b: new dependent option (priority 0x1)
[ 0.463638] pnp 00:0b: io min 0x2f8 max 0x2f8 align 8 size 8 flags 0x1
[ 0.463638] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000008 flags 0x1
[ 0.463638] pnp 00:0b: new dependent option (priority 0x1)
[ 0.463638] pnp 00:0b: io min 0x3e8 max 0x3e8 align 8 size 8 flags 0x1
[ 0.463638] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
[ 0.463638] pnp 00:0b: new dependent option (priority 0x1)
[ 0.463638] pnp 00:0b: io min 0x2e8 max 0x2e8 align 8 size 8 flags 0x1
[ 0.463638] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000008 flags 0x1
[ 0.463638] pnp 00:0b: new dependent option (priority 0x2)
[ 0.463638] pnp 00:0b: io min 0x3f8 max 0x3f8 align 8 size 8 flags 0x1
[ 0.463638] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000008 flags 0x1
[ 0.463638] pnp 00:0b: new dependent option (priority 0x2)
[ 0.463638] pnp 00:0b: io min 0x2f8 max 0x2f8 align 8 size 8 flags 0x1
[ 0.463638] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
[ 0.463638] pnp 00:0b: new dependent option (priority 0x2)
[ 0.463638] pnp 00:0b: io min 0x3e8 max 0x3e8 align 8 size 8 flags 0x1
[ 0.463638] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000008 flags 0x1
[ 0.463638] pnp 00:0b: new dependent option (priority 0x2)
[ 0.463638] pnp 00:0b: io min 0x2e8 max 0x2e8 align 8 size 8 flags 0x1
[ 0.463638] pnp 00:0b: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
[ 0.463638] pnp 00:0b: end dependent options
[ 0.463638] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.463638] pnp: PnP ACPI: found 12 devices
[ 0.463638] ACPI: ACPI bus type pnp unregistered
[ 0.467638] usbcore: registered new interface driver usbfs
[ 0.467638] usbcore: registered new interface driver hub
[ 0.467638] usbcore: registered new device driver usb
[ 0.467638] PCI: Using ACPI for IRQ routing
[ 0.487639] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.487639] hpet0: 3 32-bit timers, 25000000 Hz
[ 0.487639] ACPI: RTC can wake from S4
[ 0.506292] pnp: the driver 'system' has been registered
[ 0.506301] system 00:00: iomem range 0xffc00000-0xffffffff could not be reserved
[ 0.506363] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.506424] system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 0.506486] system 00:00: iomem range 0xfed00000-0xfed00fff has been reserved
[ 0.506533] system 00:00: driver attached
[ 0.506539] system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.506599] system 00:02: driver attached
[ 0.506606] system 00:03: ioport range 0x8000-0x807f has been reserved
[ 0.506653] system 00:03: ioport range 0x8080-0x80ff has been reserved
[ 0.506699] system 00:03: ioport range 0x8400-0x847f has been reserved
[ 0.506745] system 00:03: ioport range 0x8480-0x84ff has been reserved
[ 0.506792] system 00:03: ioport range 0x8800-0x887f has been reserved
[ 0.506838] system 00:03: ioport range 0x8880-0x88ff has been reserved
[ 0.506884] system 00:03: ioport range 0x2040-0x207f has been reserved
[ 0.506931] system 00:03: ioport range 0x2000-0x203f has been reserved
[ 0.506977] system 00:03: driver attached
[ 0.506982] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 0.507028] system 00:05: driver attached
[ 0.507034] system 00:0a: ioport range 0xc00-0xc7f has been reserved
[ 0.508446] Switched to high resolution mode on CPU 1
[ 0.507081] system 00:0a: driver attached
[ 0.508478] Switched to high resolution mode on CPU 2
[ 0.508542] Switched to high resolution mode on CPU 3
[ 0.508625] PCI: Bridge: 0000:00:09.0
[ 0.508625] IO window: 3000-3fff
[ 0.508625] MEM window: 0xd0100000-0xd01fffff
[ 0.508626] PREFETCH window: 0x00000000d8000000-0x00000000dfffffff
[ 0.508626] PCI: Bridge: 0000:00:0b.0
[ 0.508626] IO window: disabled.
[ 0.508626] MEM window: 0xd0200000-0xd02fffff
[ 0.508626] PREFETCH window: disabled.
[ 0.508626] PCI: Bridge: 0000:00:0c.0
[ 0.508626] IO window: disabled.
[ 0.508626] MEM window: disabled.
[ 0.508626] PREFETCH window: disabled.
[ 0.508626] PCI: Bridge: 0000:00:0d.0
[ 0.508626] IO window: disabled.
[ 0.508626] MEM window: disabled.
[ 0.508626] PREFETCH window: disabled.
[ 0.508626] PCI: Bridge: 0000:00:0e.0
[ 0.508626] IO window: disabled.
[ 0.508626] MEM window: disabled.
[ 0.508626] PREFETCH window: disabled.
[ 0.508626] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 0.508626] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 0.508626] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 0.508626] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 0.508626] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 0.508626] NET: Registered protocol family 2
[ 0.510422] Switched to high resolution mode on CPU 0
[ 0.559108] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.559108] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.559108] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.559108] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.559108] TCP reno registered
[ 0.577682] NET: Registered protocol family 1
[ 0.577828] checking if image is initramfs... it is
[ 1.009466] Freeing initrd memory: 6228k freed
[ 1.011778] Simple Boot Flag at 0x62 set to 0x1
[ 1.015785] audit: initializing netlink socket (disabled)
[ 1.015785] type=2000 audit(1223644784.000:1): initialized
[ 1.015785] Total HugeTLB memory allocated, 0
[ 1.015786] VFS: Disk quotas dquot_6.5.1
[ 1.015786] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.015786] msgmni has been set to 2007
[ 1.015786] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.015786] io scheduler noop registered
[ 1.015786] io scheduler anticipatory registered
[ 1.015786] io scheduler deadline registered
[ 1.015786] io scheduler cfq registered (default)
[ 1.015786] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 1.015786] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 1.015786] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 1.015786] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 1.015786] pci 0000:00:0b.0: Found enabled HT MSI Mapping
[ 1.015786] pci 0000:00:0b.0: Linking AER extended capability
[ 1.015786] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 1.015786] pci 0000:00:0c.0: Found enabled HT MSI Mapping
[ 1.015786] pci 0000:00:0c.0: Linking AER extended capability
[ 1.015786] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 1.015786] pci 0000:00:0d.0: Found enabled HT MSI Mapping
[ 1.015786] pci 0000:00:0d.0: Linking AER extended capability
[ 1.015786] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 1.015786] pci 0000:00:0e.0: Found enabled HT MSI Mapping
[ 1.015786] pci 0000:00:0e.0: Linking AER extended capability
[ 1.015786] pci 0000:01:08.0: Boot video device
[ 1.015786] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 1.015786] assign_interrupt_mode Found MSI capability
[ 1.015786] Allocate Port Service[0000:00:0b.0:pcie00]
[ 1.015786] Allocate Port Service[0000:00:0b.0:pcie01]
[ 1.015786] Allocate Port Service[0000:00:0b.0:pcie03]
[ 1.015786] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 1.015786] assign_interrupt_mode Found MSI capability
[ 1.015786] Allocate Port Service[0000:00:0c.0:pcie00]
[ 1.015786] Allocate Port Service[0000:00:0c.0:pcie01]
[ 1.015786] Allocate Port Service[0000:00:0c.0:pcie03]
[ 1.015786] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 1.015786] assign_interrupt_mode Found MSI capability
[ 1.015786] Allocate Port Service[0000:00:0d.0:pcie00]
[ 1.015786] Allocate Port Service[0000:00:0d.0:pcie01]
[ 1.015786] Allocate Port Service[0000:00:0d.0:pcie03]
[ 1.015786] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 1.015786] assign_interrupt_mode Found MSI capability
[ 1.015786] Allocate Port Service[0000:00:0e.0:pcie00]
[ 1.015786] Allocate Port Service[0000:00:0e.0:pcie01]
[ 1.015786] Allocate Port Service[0000:00:0e.0:pcie03]
[ 1.016983] AER service couldn't init device 0000:00:0b.0:pcie01 - no _OSC support
[ 1.025242] AER service couldn't init device 0000:00:0c.0:pcie01 - no _OSC support
[ 1.026388] AER service couldn't init device 0000:00:0d.0:pcie01 - no _OSC support
[ 1.026914] AER service couldn't init device 0000:00:0e.0:pcie01 - no _OSC support
[ 1.030908] hpet_resources: 0xfed00000 is busy
[ 1.030908] Linux agpgart interface v0.103
[ 1.030908] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.030908] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.030908] pnp: the driver 'serial' has been registered
[ 1.030908] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.030908] serial 00:0b: driver attached
[ 1.034908] brd: module loaded
[ 1.034908] input: Macintosh mouse button emulation as /class/input/input0
[ 1.034908] pnp: the driver 'i8042 kbd' has been registered
[ 1.034908] pnp: the driver 'i8042 aux' has been registered
[ 1.034908] pnp: the driver 'i8042 kbd' has been unregistered
[ 1.034908] pnp: the driver 'i8042 aux' has been unregistered
[ 1.034908] PNP: No PS/2 controller found. Probing ports directly.
[ 1.037390] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.038912] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.061570] mice: PS/2 mouse device common for all mice
[ 1.061570] pnp: the driver 'rtc_cmos' has been registered
[ 1.061570] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 1.061570] rtc0: alarms up to one year, y3k
[ 1.061570] rtc_cmos 00:08: driver attached
[ 1.061570] cpuidle: using governor ladder
[ 1.061570] cpuidle: using governor menu
[ 1.061570] No iBFT detected.
[ 1.061570] TCP cubic registered
[ 1.061570] NET: Registered protocol family 17
[ 1.061570] registered taskstats version 1
[ 1.061570] rtc_cmos 00:08: setting system clock to 2008-10-10 13:19:44 UTC (1223644784)
[ 1.061570] Freeing unused kernel memory: 392k freed
[ 1.153189] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.153189] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.153189] ACPI: Processor [C000] (supports 2 throttling states)
[ 1.153189] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.153189] ACPI: ACPI0007:02 is registered as cooling_device2
[ 1.153189] ACPI: ACPI0007:03 is registered as cooling_device3
[ 1.309509] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.309509] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23
[ 1.309509] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 23 (level, low) -> IRQ 23
[ 1.309509] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 1.309509] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 1.309509] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 1.309509] ohci_hcd 0000:00:02.0: irq 23, io mem 0xd0000000
[ 1.313999] Uniform Multi-Platform E-IDE driver
[ 1.313999] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.375586] usb usb1: configuration #1 chosen from 1 choice
[ 1.375586] hub 1-0:1.0: USB hub found
[ 1.375586] hub 1-0:1.0: 10 ports detected
[ 1.477516] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.477516] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.477516] usb usb1: Product: OHCI Host Controller
[ 1.477516] usb usb1: Manufacturer: Linux 2.6.26-1-amd64 ohci_hcd
[ 1.477516] usb usb1: SerialNumber: 0000:00:02.0
[ 1.479886] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
[ 1.479939] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 22 (level, low) -> IRQ 22
[ 1.480055] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 1.480058] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.480161] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 1.480243] ehci_hcd 0000:00:02.1: debug port 1
[ 1.480287] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 1.480298] ehci_hcd 0000:00:02.1: irq 22, io mem 0xd0001000
[ 1.491498] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.491611] usb usb2: configuration #1 chosen from 1 choice
[ 1.491678] hub 2-0:1.0: USB hub found
[ 1.491724] hub 2-0:1.0: 10 ports detected
[ 1.645873] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.645921] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.645981] usb usb2: Product: EHCI Host Controller
[ 1.646024] usb usb2: Manufacturer: Linux 2.6.26-1-amd64 ehci_hcd
[ 1.646069] usb usb2: SerialNumber: 0000:00:02.1
[ 1.647907] tg3.c:v3.92.1 (June 9, 2008)
[ 1.649076] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 19
[ 1.649125] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNK2] -> GSI 19 (level, low) -> IRQ 19
[ 1.649234] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 1.718655] eth0: Tigon3 [partno(BCM95722) rev a200 PHY(5722/5756)] (PCI Express) 10/100/1000Base-T Ethernet 00:22:19:16:b7:72
[ 1.723092] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 1.723153] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.724672] No dock devices found.
[ 1.735107] SCSI subsystem initialized
[ 1.743109] libata version 3.00 loaded.
[ 1.743109] sata_nv 0000:00:07.0: version 3.5
[ 1.743109] sata_nv 0000:00:07.0: enabling device (0005 -> 0007)
[ 1.743109] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21
[ 1.743109] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 21 (level, low) -> IRQ 21
[ 1.743109] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 1.743109] scsi0 : sata_nv
[ 1.743109] scsi1 : sata_nv
[ 1.743109] ata1: SATA max UDMA/133 cmd 0x20f0 ctl 0x20e0 bmdma 0x20b0 irq 21
[ 1.743109] ata2: SATA max UDMA/133 cmd 0x20d0 ctl 0x20c0 bmdma 0x20b8 irq 21
[ 2.378261] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.394233] ata1.00: ATA-7: WDC WD800AAJS-18TDA1, 01.00A04, max UDMA/133
[ 2.394233] ata1.00: 156250000 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.417364] ata1.00: configured for UDMA/133
[ 2.458239] usb 1-6: new full speed USB device using ohci_hcd and address 2
[ 2.679826] usb 1-6: configuration #1 chosen from 1 choice
[ 2.690875] hub 1-6:1.0: USB hub found
[ 2.714757] hub 1-6:1.0: 3 ports detected
[ 2.942339] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.942331] isa bounce pool size: 16 pages
[ 2.942331] scsi 0:0:0:0: Direct-Access ATA WDC WD800AAJS-18 01.0 PQ: 0 ANSI: 5
[ 2.942331] ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 20
[ 2.942331] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSI1] -> GSI 20 (level, low) -> IRQ 20
[ 2.942331] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 2.942331] scsi2 : sata_nv
[ 2.947328] scsi3 : sata_nv
[ 2.947328] ata3: SATA max UDMA/133 cmd 0x2440 ctl 0x2430 bmdma 0x2400 irq 20
[ 2.947328] ata4: SATA max UDMA/133 cmd 0x2420 ctl 0x2410 bmdma 0x2408 irq 20
[ 3.000770] usb 1-6: New USB device found, idVendor=0472, idProduct=0065
[ 3.000818] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.000865] usb 1-6: Product: Generic USB Hub
[ 3.000906] usb 1-6: Manufacturer: Chicony
[ 3.210178] usb 1-6.1: new full speed USB device using ohci_hcd and address 3
[ 3.315634] usb 1-6.1: configuration #1 chosen from 1 choice
[ 3.331636] usb 1-6.1: New USB device found, idVendor=0472, idProduct=0065
[ 3.331636] usb 1-6.1: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[ 3.331636] usb 1-6.1: Product: PFU-65 USB Keyboard
[ 3.331636] usb 1-6.1: Manufacturer: Chicony
[ 3.430714] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.438792] ata3.00: ATAPI: HL-DT-STDVD-ROM GDRH20N, 0D08, max UDMA/100
[ 3.454789] ata3.00: configured for UDMA/100
[ 3.555047] usb 1-6.3: new low speed USB device using ohci_hcd and address 4
[ 3.658021] usb 1-6.3: configuration #1 chosen from 1 choice
[ 3.658021] usb 1-6.3: New USB device found, idVendor=046d, idProduct=c50a
[ 3.658021] usb 1-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.658021] usb 1-6.3: Product: USB Receiver
[ 3.658021] usb 1-6.3: Manufacturer: Logitech
[ 3.844928] usbcore: registered new interface driver hiddev
[ 3.851422] input: Chicony PFU-65 USB Keyboard as /class/input/input1
[ 3.869377] input,hidraw0: USB HID v1.00 Keyboard [Chicony PFU-65 USB Keyboard] on usb-0000:00:02.0-6.1
[ 3.877350] input: Logitech USB Receiver as /class/input/input2
[ 3.901380] input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-6.3
[ 3.901536] usbcore: registered new interface driver usbhid
[ 3.901582] usbhid: v2.6:USB HID core driver
[ 3.959411] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.961101] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDRH20N 0D08 PQ: 0 ANSI: 5
[ 3.977471] Driver 'sd' needs updating - please use bus_type methods
[ 3.977471] sd 0:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB)
[ 3.977471] sd 0:0:0:0: [sda] Write Protect is off
[ 3.977471] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.977471] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.977471] sd 0:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB)
[ 3.977471] sd 0:0:0:0: [sda] Write Protect is off
[ 3.977471] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.977471] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.977471] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 3.986221] sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 4.014577] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.019445] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 4.019445] Uniform CD-ROM driver Revision: 3.20
[ 4.019445] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 4.030222] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.030289] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 4.353534] PM: Starting manual resume from disk
[ 4.401079] kjournald starting. Commit interval 5 seconds
[ 4.402462] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.570619] udevd version 125 started
[ 5.940367] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 5.955590] input: Power Button (FF) as /class/input/input3
[ 6.072120] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2040
[ 6.072120] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2000
[ 6.097212] ACPI: Power Button (FF) [PWRF]
[ 6.097386] input: Power Button (CM) as /class/input/input4
[ 6.106490] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.167726] ACPI: Power Button (CM) [PWRB]
[ 6.176147] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.246258] input: PC Speaker as /class/input/input5
[ 6.417911] Error: Driver 'pcspkr' is already registered, aborting...
[ 8.139864] Adding 4883720k swap on /dev/sda5. Priority:-1 extents:1 across:4883720k
[ 8.459594] EXT3 FS on sda3, internal journal
[ 9.316824] loop: module loaded
[ 9.363249] device-mapper: uevent: version 1.0.3
[ 9.363249] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 9.893001] kjournald starting. Commit interval 5 seconds
[ 9.893001] EXT3 FS on sda6, internal journal
[ 9.893001] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.667226] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.372176] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 13.500957] NET: Registered protocol family 10
[ 13.500957] lo: Disabled Privacy Extensions
[ 13.501947] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.208121] tg3: eth0: Link is up at 1000 Mbps, full duplex.
[ 14.208819] tg3: eth0: Flow control is off for TX and off for RX.
[ 14.208819] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 14.853526] device eth0 entered promiscuous mode
[ 15.837100] device eth0 left promiscuous mode