Dell Latitude E4200で NetBSD

Dellから Latitude E4200の評価機を借りたので NetBSDを入れてみた

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.

NetBSD 5.0_BETA (GENERIC) #0: Mon Dec 15 17:03:32 UTC 2008
builds@b0.netbsd.org:/home/builds/ab/netbsd-5/i386/200812150000Z-obj/home/builds/ab/netbsd-5/src/sys/arch/i386/compile/GENERIC
total memory = 1999 MB
avail memory = 1953 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Inc. Latitude E4200
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1396MHz, id 0x10676
cpu0: Enhanced SpeedStep (972 mV) 700 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 800 700 600
cpu1 at mainbus0 apid 1: Intel 686-class, 1396MHz, id 0x10676
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId , AslId
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
pckbc1 at acpi0 (PS2M, PNP0F13): aux port
pckbc1: irq 12
pckbc2 at acpi0 (KBC, PNP0303): kbd port
pckbc2: io 0x60,0x64,0x62,0x66 irq 1
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43,0x50-0x53 irq 2
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61,0x63,0x65,0x67
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
acpiec0 at acpi0 (ECDV, PNP0C09-0): ACPI Embedded Controller
acpiec0: io 0x930,0x934
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery (Control Method)
acpibat0: battery info: Samsung SDI, LION, DELL Y082C88 10030
acpibat1 at acpi0 (BAT1, PNP0C0A-2): ACPI Battery (Control Method)
AMW0 (pnp0c14) at acpi0 not configured
acpitz0 at acpi0 (THM): critical 102.0C, passive cooling
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x2a40 (rev. 0x07)
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2a42 (rev. 0x07)
vga1: WARNING: ignoring 64-bit BAR @ 0x10
vga1: WARNING: ignoring 64-bit BAR @ 0x18
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
vendor 0x8086 product 0x2a43 (miscellaneous display, revision 0x07) at pci0 dev 2 function 1 not configured
wm0 at pci0 dev 25 function 0: 82801I mobile (AMT) LAN Controller, rev. 3
wm0: interrupting at ioapic0 pin 22
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address 00:21:70:b1:8e:74
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2937 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2938 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 26 function 2: vendor 0x8086 product 0x2939 (rev. 0x03)
uhci2: interrupting at ioapic0 pin 22
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x293c (rev. 0x03)
ehci0: interrupting at ioapic0 pin 22
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 21
azalia0: host: 0x8086/0x293e (rev. 3), HDA rev. 1.0
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x2940 (rev. 0x03)
ppb0: disabling notification events
pci1 at ppb0 bus 11
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2942 (rev. 0x03)
ppb1: disabling notification events
pci2 at ppb1 bus 12
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x8086 product 0x4232 (miscellaneous network) at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 3: vendor 0x8086 product 0x2946 (rev. 0x03)
ppb2: disabling notification events
pci3 at ppb2 bus 13
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
uhci3 at pci0 dev 29 function 0: vendor 0x8086 product 0x2934 (rev. 0x03)
uhci3: interrupting at ioapic0 pin 20
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 1: vendor 0x8086 product 0x2935 (rev. 0x03)
uhci4: interrupting at ioapic0 pin 21
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 2: vendor 0x8086 product 0x2936 (rev. 0x03)
uhci5: interrupting at ioapic0 pin 22
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x293a (rev. 0x03)
ehci1: interrupting at ioapic0 pin 20
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0x93)
pci4 at ppb3 bus 2
pci4: i/o space, memory space enabled
fwohci0 at pci4 dev 1 function 0: vendor 0x1180 product 0x0832 (rev. 0x05)
fwohci0: interrupting at ioapic0 pin 19
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 48:4f:c0:00:39:c3:41:5c
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
vendor 0x1180 product 0x0822 (SD Host Controller system, interface 0x01, revision 0x22) at pci4 dev 1 function 1 not configured
vendor 0x1180 product 0x0843 (miscellaneous system, revision 0x12) at pci4 dev 1 function 2 not configured
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x2917 (rev. 0x03)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x282a
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: AHCI revision 1.2, 4 ports, 32 command slots, features 0xef22e0e0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 4
atabus3 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x2930 (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at pcib0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
azalia0: codec[0]: 0x111d/0x76b2 (rev. 3.2), HDA rev. 1.0
azalia0: codec[2]: 0x8086/0x2802 (rev. 0.0), HDA rev. 1.0
audio0 at azalia0: full duplex, independent
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 5: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0:
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 119 GB, 248085 cyl, 16 head, 63 sec, 512 bytes/sect x 250069680 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
ahcisata0 port 1: PHY offline
atapibus0 at atabus3: 1 targets
cd0 at atapibus0 drive 0: cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:5:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhub8 at uhub3 port 3: vendor 0x413c product 0x2513, class 9/0, rev 2.00/a0.05, addr 2
uhub8: multiple transaction translators
uhub8: 3 ports with 3 removable, self powered
uhub9 at uhub0 port 1: Broadcom BCM2046B1, class 9/0, rev 2.00/1.00, addr 2
uhub9: 3 ports with 0 removable, self powered
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
uhidev0 at uhub9 port 1 configuration 1 interface 0
uhidev0: vendor 0x413c product 0x8161, rev 2.00/1.00, addr 3, iclass 3/1
uhidev0: 1 report ids
ukbd0 at uhidev0 reportid 1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
ugen0 at uhub2 port 1
ugen0: Broadcom Corp 5880, rev 1.10/1.01, addr 2
uhidev1 at uhub9 port 2 configuration 1 interface 0
uhidev1: vendor 0x413c product 0x8162, rev 2.00/1.00, addr 4, iclass 3/1
uhidev1: 125 report ids
ums0 at uhidev1 reportid 2: 3 buttons
wsmouse1 at ums0 mux 0
uhid0 at uhidev1 reportid 125: input=2, output=0, feature=0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)