Express5800/GT110b(2C/G1101-1HD) NP8100-1592YP4Yで、Ubuntu 10.04 64bitで実行した dmesgの結果

Express5800/GT110b(2C/G1101-1HD) NP8100-1592YP4Yで、Ubuntu 10.04 64bitで実行した dmesgの結果

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-21-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
[ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7a0000 (usable)
[ 0.000000] BIOS-e820: 000000003f7a0000 - 000000003f7bc000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f7bc000 - 000000003f7bd000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f7bd000 - 000000003f7ff000 (reserved)
[ 0.000000] BIOS-e820: 000000003f800000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3f7a0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03F800000 mask FFF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009c400 (usable)
[ 0.000000] modified: 000000000009c400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000ca000 - 00000000000cc000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003f7a0000 (usable)
[ 0.000000] modified: 000000003f7a0000 - 000000003f7bc000 (ACPI data)
[ 0.000000] modified: 000000003f7bc000 - 000000003f7bd000 (ACPI NVS)
[ 0.000000] modified: 000000003f7bd000 - 000000003f7ff000 (reserved)
[ 0.000000] modified: 000000003f800000 - 0000000040000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000003f7a0000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 003f600000 page 2M
[ 0.000000] 003f600000 - 003f7a0000 page 4k
[ 0.000000] kernel direct mapping tables up to 3f7a0000 @ 10000-13000
[ 0.000000] RAMDISK: 3ee0e000 - 3f76fcaf
[ 0.000000] ACPI: RSDP 00000000000f6e60 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 000000003f7b644d 0006C (v01 PTLTD ? XSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 000000003f7bbcfa 000F4 (v03 INTEL LYNNFLD 06040000 PTL 00000002)
[ 0.000000] ACPI: DSDT 000000003f7b64b9 057BD (v01 Intel LYNNFLD 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS 000000003f7bcfc0 00040
[ 0.000000] ACPI: TCPA 000000003f7bbdee 00032 (v01 Intel TYLERBRG 06040000 LOHR 0000005A)
[ 0.000000] ACPI: SSDT 000000003f7ae405 00C70 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: DMAR 000000003f7bbe44 00088 (v01 Intel OEMDMAR 06040000 LOHR 00000001)
[ 0.000000] ACPI: APIC 000000003f7bbecc 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG 000000003f7bbf34 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 000000003f7bbf70 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: BOOT 000000003f7bbfa8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: BERT 000000003f7bbfd0 00030 (v01 PTL WHEAPTL 06040000 PTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003f7a0000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003f7a0000
[ 0.000000] NODE_DATA [0000000000011000 - 0000000000015fff]
[ 0.000000] bootmap [0000000000016000 - 000000000001def7] pages 8
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 003f7a0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a29e64] TEXT DATA BSS ==> [0001000000 - 0001a29e64]
[ 0.000000] #3 [003ee0e000 - 003f76fcaf] RAMDISK ==> [003ee0e000 - 003f76fcaf]
[ 0.000000] #4 [000009c400 - 0000100000] BIOS reserved ==> [000009c400 - 0000100000]
[ 0.000000] #5 [0001a2a000 - 0001a2a1d0] BRK ==> [0001a2a000 - 0001a2a1d0]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] found SMP MP-table at [ffff8800000f6e90] f6e90
[ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880002000000-ffff880002dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x0003f7a0
[ 0.000000] On node 0 totalpages: 259884
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 103 pages reserved
[ 0.000000] DMA zone: 3821 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3499 pages used for memmap
[ 0.000000] DMA32 zone: 252405 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ca000
[ 0.000000] PM: Registered nosave memory: 00000000000ca000 - 00000000000cc000
[ 0.000000] PM: Registered nosave memory: 00000000000cc000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u1048576
[ 0.000000] pcpu-alloc: s91544 r8192 d23144 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 256226
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1004804k/1040000k available (5409k kernel code, 464k absent, 34732k reserved, 2976k data, 876k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 10485760 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] alloc irq_desc for 24 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] alloc irq_desc for 25 on node 0
[ 0.000000] alloc kstat_irqs on node 0
[ 0.000000] HPET: 8 timers in total, 2 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.010000] Detected 2261.183 MHz processor.
[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4522.36 BogoMIPS (lpj=22611830)
[ 0.000023] Security Framework initialized
[ 0.000035] AppArmor: AppArmor initialized
[ 0.000116] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000472] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000630] Mount-cache hash table entries: 256
[ 0.000732] Initializing cgroup subsys ns
[ 0.000736] Initializing cgroup subsys cpuacct
[ 0.000739] Initializing cgroup subsys memory
[ 0.000745] Initializing cgroup subsys devices
[ 0.000748] Initializing cgroup subsys freezer
[ 0.000749] Initializing cgroup subsys net_cls
[ 0.000765] CPU: Physical Processor ID: 0
[ 0.000766] CPU: Processor Core ID: 0
[ 0.000770] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000772] CPU: L2 cache: 256K
[ 0.000773] CPU: L3 cache: 2048K
[ 0.000776] CPU 0/0x0 -> Node 0
[ 0.000779] mce: CPU supports 9 MCE banks
[ 0.000789] CPU0: Thermal monitoring enabled (TM1)
[ 0.000793] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6
[ 0.000801] using mwait in idle threads.
[ 0.000803] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.000808] ... version: 3
[ 0.000809] ... bit width: 48
[ 0.000810] ... generic registers: 4
[ 0.000812] ... value mask: 0000ffffffffffff
[ 0.000813] ... max period: 000000007fffffff
[ 0.000815] ... fixed-purpose events: 3
[ 0.000816] ... event mask: 000000070000000f
[ 0.002944] ACPI: Core revision 20090903
[ 0.019093] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.019098] ftrace: allocating 22518 entries in 89 pages
[ 0.026474] Setting APIC routing to flat
[ 0.026823] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.126642] CPU0: Intel(R) Celeron(R) CPU G1101 @ 2.27GHz stepping 02
[ 0.237559] Booting processor 1 APIC 0x4 ip 0x6000
[ 0.247813] Initializing CPU#1
[ 0.397131] CPU: Physical Processor ID: 0
[ 0.397133] CPU: Processor Core ID: 2
[ 0.397135] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.397137] CPU: L2 cache: 256K
[ 0.397138] CPU: L3 cache: 2048K
[ 0.397140] CPU 1/0x4 -> Node 0
[ 0.397152] CPU1: Thermal monitoring enabled (TM1)
[ 0.397156] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6
[ 0.397243] CPU1: Intel(R) Celeron(R) CPU G1101 @ 2.27GHz stepping 02
[ 0.397250] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.417234] Brought up 2 CPUs
[ 0.417237] Total of 2 processors activated (9044.29 BogoMIPS).
[ 0.417623] CPU0 attaching sched-domain:
[ 0.417626] domain 0: span 0-1 level MC
[ 0.417628] groups: 0 1
[ 0.417634] CPU1 attaching sched-domain:
[ 0.417636] domain 0: span 0-1 level MC
[ 0.417637] groups: 1 0
[ 0.417792] devtmpfs: initialized
[ 0.418080] regulator: core version 0.5
[ 0.418107] Time: 16:26:58 Date: 05/29/10
[ 0.418141] NET: Registered protocol family 16
[ 0.418225] Trying to unpack rootfs image as initramfs...
[ 0.418251] ACPI: bus type pci registered
[ 0.418308] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 16
[ 0.418311] PCI: MCFG area at e0000000 reserved in E820
[ 0.418524] PCI: Using MMCONFIG at e0000000 - e10fffff
[ 0.418526] PCI: Using configuration type 1 for base access
[ 0.427165] bio: create slab at 0
[ 0.427655] ACPI: EC: Look up EC in DSDT
[ 0.428593] ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
[ 0.428599] \_SB_:_OSC evaluation returned wrong type
[ 0.428601] _OSC request data:1 7
[ 0.429726] ACPI: Interpreter enabled
[ 0.429728] ACPI: (supports S0 S1 S4 S5)
[ 0.429743] ACPI: Using IOAPIC for interrupt routing
[ 0.432926] ACPI: No dock devices found.
[ 0.433883] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.433975] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.433978] pci 0000:00:01.0: PME# disabled
[ 0.434051] pci 0000:00:1a.0: reg 10 32bit mmio: [0xdc200000-0xdc2003ff]
[ 0.434101] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.434105] pci 0000:00:1a.0: PME# disabled
[ 0.434165] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.434168] pci 0000:00:1c.0: PME# disabled
[ 0.434230] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.434234] pci 0000:00:1c.4: PME# disabled
[ 0.434294] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.434297] pci 0000:00:1c.7: PME# disabled
[ 0.434344] pci 0000:00:1d.0: reg 10 32bit mmio: [0xdc201000-0xdc2013ff]
[ 0.434394] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.434398] pci 0000:00:1d.0: PME# disabled
[ 0.434571] pci 0000:00:1f.2: reg 10 io port: [0x1830-0x1837]
[ 0.434577] pci 0000:00:1f.2: reg 14 io port: [0x1824-0x1827]
[ 0.434584] pci 0000:00:1f.2: reg 18 io port: [0x1828-0x182f]
[ 0.434590] pci 0000:00:1f.2: reg 1c io port: [0x1820-0x1823]
[ 0.434596] pci 0000:00:1f.2: reg 20 io port: [0x1810-0x181f]
[ 0.434603] pci 0000:00:1f.2: reg 24 io port: [0x1800-0x180f]
[ 0.434654] pci 0000:00:1f.3: reg 10 64bit mmio: [0xdc202000-0xdc2020ff]
[ 0.434667] pci 0000:00:1f.3: reg 20 io port: [0x1840-0x185f]
[ 0.434714] pci 0000:00:1f.5: reg 10 io port: [0x1888-0x188f]
[ 0.434720] pci 0000:00:1f.5: reg 14 io port: [0x183c-0x183f]
[ 0.434726] pci 0000:00:1f.5: reg 18 io port: [0x1880-0x1887]
[ 0.434732] pci 0000:00:1f.5: reg 1c io port: [0x1838-0x183b]
[ 0.434739] pci 0000:00:1f.5: reg 20 io port: [0x1870-0x187f]
[ 0.434745] pci 0000:00:1f.5: reg 24 io port: [0x1860-0x186f]
[ 0.434991] pci 0000:0e:00.0: reg 10 32bit mmio: [0xdc120000-0xdc13ffff]
[ 0.435011] pci 0000:0e:00.0: reg 18 io port: [0x2000-0x201f]
[ 0.435022] pci 0000:0e:00.0: reg 1c 32bit mmio: [0xdc100000-0xdc103fff]
[ 0.435101] pci 0000:0e:00.0: PME# supported from D0 D3hot D3cold
[ 0.435108] pci 0000:0e:00.0: PME# disabled
[ 0.435180] pci 0000:00:1c.7: bridge io port: [0x2000-0x2fff]
[ 0.435183] pci 0000:00:1c.7: bridge 32bit mmio: [0xdc100000-0xdc1fffff]
[ 0.435223] pci 0000:11:03.0: reg 10 32bit mmio pref: [0xd8000000-0xdbffffff]
[ 0.435229] pci 0000:11:03.0: reg 14 32bit mmio: [0xdc000000-0xdc03ffff]
[ 0.435236] pci 0000:11:03.0: reg 18 io port: [0x3000-0x307f]
[ 0.435270] pci 0000:11:03.0: supports D1 D2
[ 0.435309] pci 0000:00:1e.0: transparent bridge
[ 0.435313] pci 0000:00:1e.0: bridge io port: [0x3000-0x3fff]
[ 0.435317] pci 0000:00:1e.0: bridge 32bit mmio: [0xdc000000-0xdc0fffff]
[ 0.435323] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd8000000-0xdbffffff]
[ 0.435344] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.435634] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
[ 0.435699] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.435753] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 0.435806] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX8._PRT]
[ 0.435875] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.438155] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.438237] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.438317] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.438397] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.438477] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.438558] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.438638] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.438718] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *9
[ 0.438819] vgaarb: device added: PCI:0000:11:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.438821] vgaarb: loaded
[ 0.438910] SCSI subsystem initialized
[ 0.438963] libata version 3.00 loaded.
[ 0.439014] usbcore: registered new interface driver usbfs
[ 0.439023] usbcore: registered new interface driver hub
[ 0.439042] usbcore: registered new device driver usb
[ 0.439134] ACPI: WMI: Mapper loaded
[ 0.439135] PCI: Using ACPI for IRQ routing
[ 0.439257] NetLabel: Initializing
[ 0.439259] NetLabel: domain hash size = 128
[ 0.439260] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.439273] NetLabel: unlabeled traffic allowed by default
[ 0.439302] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 0, 0, 0, 0
[ 0.439308] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.447047] hpet: hpet2 irq 24 for MSI
[ 2.293772] hpet: hpet3 irq 25 for MSI
[ 2.293792] Switching to clocksource tsc
[ 2.295374] AppArmor: AppArmor Filesystem Enabled
[ 2.295396] pnp: PnP ACPI init
[ 2.295424] ACPI: bus type pnp registered
[ 2.298808] pnp: PnP ACPI: found 11 devices
[ 2.298811] ACPI: ACPI bus type pnp unregistered
[ 2.298825] system 00:01: ioport range 0x290-0x29f has been reserved
[ 2.298828] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 2.298830] system 00:01: ioport range 0x800-0x80f has been reserved
[ 2.298833] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 2.298835] system 00:01: ioport range 0x1180-0x11bf has been reserved
[ 2.298838] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[ 2.298842] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 2.298845] system 00:01: iomem range 0xfe710000-0xfe710fff has been reserved
[ 2.298847] system 00:01: iomem range 0xfe711000-0xfe711fff has been reserved
[ 2.298850] system 00:01: iomem range 0xfe713000-0xfe713fff has been reserved
[ 2.298852] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
[ 2.298855] system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 2.298857] system 00:01: iomem range 0xfe800000-0xfe9fffff has been reserved
[ 2.298860] system 00:01: iomem range 0xfeb00000-0xfebfffff has been reserved
[ 2.298862] system 00:01: iomem range 0xfed20000-0xfed44fff has been reserved
[ 2.298865] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 2.303596] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 2.303599] pci 0000:00:01.0: IO window: disabled
[ 2.303602] pci 0000:00:01.0: MEM window: disabled
[ 2.303604] pci 0000:00:01.0: PREFETCH window: disabled
[ 2.303608] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
[ 2.303611] pci 0000:00:1c.0: IO window: 0x4000-0x4fff
[ 2.303616] pci 0000:00:1c.0: MEM window: 0x40000000-0x401fffff
[ 2.303620] pci 0000:00:1c.0: PREFETCH window: 0x00000040200000-0x000000403fffff
[ 2.303625] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
[ 2.303628] pci 0000:00:1c.4: IO window: 0x5000-0x5fff
[ 2.303632] pci 0000:00:1c.4: MEM window: 0x40400000-0x405fffff
[ 2.303636] pci 0000:00:1c.4: PREFETCH window: 0x00000040600000-0x000000407fffff
[ 2.303642] pci 0000:00:1c.7: PCI bridge, secondary bus 0000:0e
[ 2.303644] pci 0000:00:1c.7: IO window: 0x2000-0x2fff
[ 2.303648] pci 0000:00:1c.7: MEM window: 0xdc100000-0xdc1fffff
[ 2.303652] pci 0000:00:1c.7: PREFETCH window: 0x00000040800000-0x000000409fffff
[ 2.303658] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:11
[ 2.303661] pci 0000:00:1e.0: IO window: 0x3000-0x3fff
[ 2.303665] pci 0000:00:1e.0: MEM window: 0xdc000000-0xdc0fffff
[ 2.303669] pci 0000:00:1e.0: PREFETCH window: 0x000000d8000000-0x000000dbffffff
[ 2.303690] alloc irq_desc for 16 on node -1
[ 2.303692] alloc kstat_irqs on node -1
[ 2.303701] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.303705] pci 0000:00:01.0: setting latency timer to 64
[ 2.303712] pci 0000:00:1c.0: enabling device (0140 -> 0143)
[ 2.303717] alloc irq_desc for 17 on node -1
[ 2.303718] alloc kstat_irqs on node -1
[ 2.303721] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.303726] pci 0000:00:1c.0: setting latency timer to 64
[ 2.303733] pci 0000:00:1c.4: enabling device (0140 -> 0143)
[ 2.303737] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.303741] pci 0000:00:1c.4: setting latency timer to 64
[ 2.303749] alloc irq_desc for 19 on node -1
[ 2.303751] alloc kstat_irqs on node -1
[ 2.303754] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.303757] pci 0000:00:1c.7: setting latency timer to 64
[ 2.303764] pci 0000:00:1e.0: setting latency timer to 64
[ 2.303769] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 2.303771] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 2.303774] pci_bus 0000:05: resource 0 io: [0x4000-0x4fff]
[ 2.303776] pci_bus 0000:05: resource 1 mem: [0x40000000-0x401fffff]
[ 2.303778] pci_bus 0000:05: resource 2 pref mem [0x40200000-0x403fffff]
[ 2.303780] pci_bus 0000:0d: resource 0 io: [0x5000-0x5fff]
[ 2.303782] pci_bus 0000:0d: resource 1 mem: [0x40400000-0x405fffff]
[ 2.303783] pci_bus 0000:0d: resource 2 pref mem [0x40600000-0x407fffff]
[ 2.303786] pci_bus 0000:0e: resource 0 io: [0x2000-0x2fff]
[ 2.303788] pci_bus 0000:0e: resource 1 mem: [0xdc100000-0xdc1fffff]
[ 2.303790] pci_bus 0000:0e: resource 2 pref mem [0x40800000-0x409fffff]
[ 2.303792] pci_bus 0000:11: resource 0 io: [0x3000-0x3fff]
[ 2.303794] pci_bus 0000:11: resource 1 mem: [0xdc000000-0xdc0fffff]
[ 2.303796] pci_bus 0000:11: resource 2 pref mem [0xd8000000-0xdbffffff]
[ 2.303797] pci_bus 0000:11: resource 3 io: [0x00-0xffff]
[ 2.303799] pci_bus 0000:11: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 2.303841] NET: Registered protocol family 2
[ 2.303967] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 2.304409] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 2.305251] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.305694] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.305698] TCP reno registered
[ 2.305821] NET: Registered protocol family 1
[ 2.305917] pci 0000:11:03.0: Boot video device
[ 2.305970] Simple Boot Flag at 0x36 set to 0x80
[ 2.306169] Scanning for low memory corruption every 60 seconds
[ 2.306323] audit: initializing netlink socket (disabled)
[ 2.306347] type=2000 audit(1275150419.189:1): initialized
[ 2.315438] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.316775] VFS: Disk quotas dquot_6.5.2
[ 2.316841] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.317486] fuse init (API version 7.13)
[ 2.317565] msgmni has been set to 1962
[ 2.317793] alg: No test for stdrng (krng)
[ 2.317861] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.317864] io scheduler noop registered
[ 2.317866] io scheduler anticipatory registered
[ 2.317867] io scheduler deadline registered
[ 2.317897] io scheduler cfq registered (default)
[ 2.318014] alloc irq_desc for 26 on node -1
[ 2.318016] alloc kstat_irqs on node -1
[ 2.318024] pcieport 0000:00:01.0: irq 26 for MSI/MSI-X
[ 2.318030] pcieport 0000:00:01.0: setting latency timer to 64
[ 2.318114] alloc irq_desc for 27 on node -1
[ 2.318116] alloc kstat_irqs on node -1
[ 2.318122] pcieport 0000:00:1c.0: irq 27 for MSI/MSI-X
[ 2.318129] pcieport 0000:00:1c.0: setting latency timer to 64
[ 2.318220] alloc irq_desc for 28 on node -1
[ 2.318221] alloc kstat_irqs on node -1
[ 2.318227] pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X
[ 2.318235] pcieport 0000:00:1c.4: setting latency timer to 64
[ 2.318326] alloc irq_desc for 29 on node -1
[ 2.318327] alloc kstat_irqs on node -1
[ 2.318333] pcieport 0000:00:1c.7: irq 29 for MSI/MSI-X
[ 2.318340] pcieport 0000:00:1c.7: setting latency timer to 64
[ 2.318415] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.318496] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.318596] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input0
[ 2.318599] ACPI: Power Button [PWRB]
[ 2.318635] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.318637] ACPI: Power Button [PWRF]
[ 2.319566] Monitor-Mwait will be used to enter C-1 state
[ 2.627638] Monitor-Mwait will be used to enter C-3 state
[ 2.627693] Monitor-Mwait will be used to enter C-3 state
[ 2.627757] processor LNXCPU:00: registered as cooling_device0
[ 2.633132] Freeing initrd memory: 9607k freed
[ 2.635390] processor LNXCPU:01: registered as cooling_device1
[ 2.637801] Linux agpgart interface v0.103
[ 2.637826] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.637933] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.638033] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.638286] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.638411] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.639170] brd: module loaded
[ 2.639520] loop: module loaded
[ 2.639587] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 2.639672] ata_piix 0000:00:1f.2: version 2.13
[ 2.639689] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.639694] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.639731] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.639788] scsi0 : ata_piix
[ 2.639844] scsi1 : ata_piix
[ 2.640679] ata1: SATA max UDMA/133 cmd 0x1830 ctl 0x1824 bmdma 0x1810 irq 19
[ 2.640684] ata2: SATA max UDMA/133 cmd 0x1828 ctl 0x1820 bmdma 0x1818 irq 19
[ 2.640707] alloc irq_desc for 18 on node -1
[ 2.640708] alloc kstat_irqs on node -1
[ 2.640714] ata_piix 0000:00:1f.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.640719] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 2.640750] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 2.640791] scsi2 : ata_piix
[ 2.640831] scsi3 : ata_piix
[ 2.641555] ata3: SATA max UDMA/133 cmd 0x1888 ctl 0x183c bmdma 0x1870 irq 18
[ 2.641558] ata4: SATA max UDMA/133 cmd 0x1880 ctl 0x1838 bmdma 0x1878 irq 18
[ 2.641800] Fixed MDIO Bus: probed
[ 2.641824] PPP generic driver version 2.4.2
[ 2.641853] tun: Universal TUN/TAP device driver, 1.6
[ 2.641855] tun: (C) 1999-2004 Max Krasnyansky
[ 2.641915] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.641931] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.641942] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.641945] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 2.641971] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.642002] ehci_hcd 0000:00:1a.0: debug port 2
[ 2.645904] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[ 2.645943] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xdc200000
[ 2.663167] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.663268] usb usb1: configuration #1 chosen from 1 choice
[ 2.663292] hub 1-0:1.0: USB hub found
[ 2.663298] hub 1-0:1.0: 2 ports detected
[ 2.663338] alloc irq_desc for 23 on node -1
[ 2.663340] alloc kstat_irqs on node -1
[ 2.663344] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.663352] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.663355] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 2.663382] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.663404] ehci_hcd 0000:00:1d.0: debug port 2
[ 2.667270] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[ 2.667281] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xdc201000
[ 2.683128] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.683224] usb usb2: configuration #1 chosen from 1 choice
[ 2.683245] hub 2-0:1.0: USB hub found
[ 2.683249] hub 2-0:1.0: 2 ports detected
[ 2.683283] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.683292] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.683342] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.686010] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.686015] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.686107] mice: PS/2 mouse device common for all mice
[ 2.686191] rtc_cmos 00:05: RTC can wake from S4
[ 2.686220] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.686249] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.686346] device-mapper: uevent: version 1.0.3
[ 2.686416] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.686458] device-mapper: multipath: version 1.1.0 loaded
[ 2.686460] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.686618] cpuidle: using governor ladder
[ 2.686697] cpuidle: using governor menu
[ 2.686988] TCP cubic registered
[ 2.687087] NET: Registered protocol family 10
[ 2.687450] lo: Disabled Privacy Extensions
[ 2.687686] NET: Registered protocol family 17
[ 2.688438] PM: Resume from disk failed.
[ 2.688448] registered taskstats version 1
[ 2.688713] Magic number: 10:245:440
[ 2.688832] rtc_cmos 00:05: setting system clock to 2010-05-29 16:27:00 UTC (1275150420)
[ 2.688835] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.688837] EDD information not available.
[ 2.712871] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.982675] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 3.003601] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.082498] ata4: link resume succeeded after 1 retries
[ 3.133071] usb 1-1: configuration #1 chosen from 1 choice
[ 3.133251] hub 1-1:1.0: USB hub found
[ 3.133509] hub 1-1:1.0: 6 ports detected
[ 3.252141] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 3.343061] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 3.343075] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 3.361953] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.382131] ata4.00: ATAPI: HL-DT-ST DVDROM DH20N, NC04, max UDMA/100
[ 3.402367] usb 2-1: configuration #1 chosen from 1 choice
[ 3.402611] hub 2-1:1.0: USB hub found
[ 3.402790] hub 2-1:1.0: 8 ports detected
[ 3.422012] ata4.00: configured for UDMA/100
[ 3.501796] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.501808] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 3.541817] ata1.00: HPA unlocked: 312500160 -> 312581808, native 312581808
[ 3.541821] ata1.00: ATA-8: WDC WD1602ABYS-19B7A0, 02.03B03, max UDMA/133
[ 3.541824] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.582715] ata1.00: configured for UDMA/133
[ 3.582919] scsi 0:0:0:0: Direct-Access ATA WDC WD1602ABYS-1 02.0 PQ: 0 ANSI: 5
[ 3.583025] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.583090] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 3.583125] sd 0:0:0:0: [sda] Write Protect is off
[ 3.583127] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.583144] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.583251] sda:
[ 3.584067] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDROM DH20N NC04 PQ: 0 ANSI: 5
[ 3.585724] sr0: scsi3-mmc drive: 62x/62x cd/rw xa/form2 cdda tray
[ 3.585729] Uniform CD-ROM driver Revision: 3.20
[ 3.585853] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 3.585887] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 3.602864] unknown partition table
[ 3.603086] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.603152] Freeing unused kernel memory: 876k freed
[ 3.603289] Write protecting the kernel read-only data: 7680k
[ 3.625164] udev: starting version 151
[ 3.675431] vga16fb: initializing
[ 3.675435] vga16fb: mapped to 0xffff8800000a0000
[ 3.675486] fb0: VGA16 VGA frame buffer device
[ 3.683923] usb 2-1.5: new full speed USB device using ehci_hcd and address 3
[ 3.696860] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 3.696863] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 3.696926] e1000e 0000:0e:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.696962] e1000e 0000:0e:00.0: setting latency timer to 64
[ 3.697140] alloc irq_desc for 30 on node -1
[ 3.697142] alloc kstat_irqs on node -1
[ 3.697148] e1000e 0000:0e:00.0: irq 30 for MSI/MSI-X
[ 3.697150] alloc irq_desc for 31 on node -1
[ 3.697151] alloc kstat_irqs on node -1
[ 3.697154] e1000e 0000:0e:00.0: irq 31 for MSI/MSI-X
[ 3.697155] alloc irq_desc for 32 on node -1
[ 3.697157] alloc kstat_irqs on node -1
[ 3.697159] e1000e 0000:0e:00.0: irq 32 for MSI/MSI-X
[ 3.813272] usb 2-1.5: configuration #1 chosen from 1 choice
[ 3.813483] hub 2-1.5:1.0: USB hub found
[ 3.813648] hub 2-1.5:1.0: 3 ports detected
[ 3.876686] 0000:0e:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 6c:f0:49:4c:0a:7c
[ 3.876688] 0000:0e:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 3.876761] 0000:0e:00.0: eth0: MAC: 3, PHY: 8, PBA No: ffffff-0ff
[ 3.886514] Console: switching to colour frame buffer device 80x30
[ 4.090702] usb 2-1.5.3: new full speed USB device using ehci_hcd and address 4
[ 4.208714] usb 2-1.5.3: configuration #1 chosen from 1 choice
[ 4.218578] usbcore: registered new interface driver hiddev
[ 4.219501] usbcore: registered new interface driver usbhid
[ 4.219506] usbhid: v2.6:USB HID core driver
[ 4.229742] input: Microsoft Microsoft® Wireless Notebook Presenter Mouse 8000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.3/2-1.5.3:1.0/input/input4
[ 4.229849] microsoft 0003:045E:0713.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft® Wireless Notebook Presenter Mouse 8000] on usb-0000:00:1d.0-1.5.3/input0
[ 4.767371] xor: automatically using best checksumming function: generic_sse
[ 4.809071] generic_sse: 8553.200 MB/sec
[ 4.809073] xor: using function: generic_sse (8553.200 MB/sec)
[ 4.811228] device-mapper: dm-raid45: initialized v0.2594b
[ 6.048282] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 6.077334] ISO 9660 Extensions: RRIP_1991A
[ 6.271417] aufs 2-standalone.tree-20091207
[ 6.396884] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 42.864505] udev: starting version 151
[ 47.521107] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 52.582470] lp: driver loaded but no devices found
[ 52.696633] ppdev: user-space parallel port driver
[ 402.203736] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 402.203991] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 412.435705] eth0: no IPv6 routers present