PowerEdge T105に Debian Sidを入れた

この前のマシンが壊れたが新しいのを立ち上げるのに時間がかかった反省から、取りあえず用途未定の DELL PowerEdge T105に取りあえず最大公約数的な OSを入れてみる。

Debian Lennyを入れてから Sidにアップグレードして、パッケージだらだら入れて、外から作業出来るように authorized_keysを入れて終わり。
特に用途はないが必要が出たらそこそこ早く投入できるだろう……。


古いマシンを一台スクラップにしてこっちに移行するかどうか迷うな。


仕入れ価格も安かったし満足しました。

以下 dmesg

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.25-2-amd64 (Debian 2.6.25-7) (maks@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Mon Jul 14 11:05:23 UTC 2008
[ 0.000000] Command line: root=UUID=b1c492df-e3c2-4def-8541-fc70d0235c1b ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ca000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
[ 0.000000] BIOS-e820: 000000007fed0000 - 000000007fee2000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fee2000 - 000000007ff7f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 523984) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F79B0, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT 7FEDD77B, 009C (r1 DELL PE_SC3 6040000 DELL 0)
[ 0.000000] ACPI: FACP 7FEE0C87, 00F4 (r3 DELL PE_SC3 6040000 DELL F4240)
[ 0.000000] ACPI: DSDT 7FEDD817, 33FC (r1 DELL PE_SC3 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS 7FEE2FC0, 0040
[ 0.000000] ACPI: TCPA 7FEE0D7B, 0032 (r1 Phoeni x 6040000 TL 0)
[ 0.000000] ACPI: SLIC 7FEE0DAD, 0024 (r1 DELL PE_SC3 6040000 PTL 1)
[ 0.000000] ACPI: SPCR 7FEE0DD1, 0050 (r1 DELL PE_SC3 6040000 PTL 1)
[ 0.000000] ACPI: EINJ 7FEE0E21, 01B0 (r1 PTL WHEAPTL 6040000 PTL 1)
[ 0.000000] ACPI: HEST 7FEE0FD1, 00A8 (r1 PTL WHEAPTL 6040000 PTL 1)
[ 0.000000] ACPI: BERT 7FEE1079, 0030 (r1 PTL WHEAPTL 6040000 PTL 1)
[ 0.000000] ACPI: SSDT 7FEE10A9, 00E1 (r1 wheaos wheaosc 6040000 INTL 20050624)
[ 0.000000] ACPI: ERST 7FEE118A, 0270 (r1 PTL WHEAPTL 6040000 PTL 1)
[ 0.000000] ACPI: SRAT 7FEE13FA, 00C0 (r1 AMD HAMMER 6040000 AMD 1)
[ 0.000000] ACPI: SSDT 7FEE14BA, 0A30 (r1 AMD POWERNOW 6040000 AMD 1)
[ 0.000000] ACPI: MCFG 7FEE1EEA, 003C (r1 PTLTD MCFG 6040000 LTP 0)
[ 0.000000] ACPI: HPET 7FEE1F26, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
[ 0.000000] ACPI: APIC 7FEE1F5E, 007A (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 7FEE1FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 2 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 3 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] SRAT: Node 0 PXM 0 0-80000000
[ 0.000000] Entering add_active_range(0, 0, 157) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 523984) 1 entries of 3200 used
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007fed0000
[ 0.000000] NODE_DATA [000000000000c000 - 0000000000012fff]
[ 0.000000] bootmap [0000000000013000 - 0000000000022fdf] pages 10
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE
[ 0.000000] early res: 2 [200000-63d2f7] TEXT DATA BSS
[ 0.000000] early res: 3 [37a08000-37fef27f] RAMDISK
[ 0.000000] early res: 4 [9dc00-9fbff] EBDA
[ 0.000000] early res: 5 [8000-bfff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[ 0.000000] [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
[ 0.000000] [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
[ 0.000000] [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
[ 0.000000] [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
[ 0.000000] [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
[ 0.000000] [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
[ 0.000000] [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
[ 0.000000] [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
[ 0.000000] [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
[ 0.000000] [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
[ 0.000000] [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
[ 0.000000] [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
[ 0.000000] [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 157
[ 0.000000] 0: 256 -> 523984
[ 0.000000] On node 0 totalpages: 523885
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1096 pages reserved
[ 0.000000] DMA zone: 2845 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7107 pages used for memmap
[ 0.000000] DMA32 zone: 512781 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] Processor #2
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] Processor #3
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ca000
[ 0.000000] PM: Registered nosave memory: 00000000000ca000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 35096 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515626
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=UUID=b1c492df-e3c2-4def-8541-fc70d0235c1b ro quiet
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.004000] time.c: Detected 2109.722 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] Node 0: aperture @ b02000000 size 32 MB
[ 0.004000] Aperture beyond 4GB. Ignoring.
[ 0.004000] No AGP bridge found
[ 0.004000] Memory: 2056100k/2095936k available (2184k kernel code, 39440k reserved, 1012k data, 372k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.080015] Calibrating delay using timer specific routine.. 4222.05 BogoMIPS (lpj=8444117)
[ 0.080061] Security Framework initialized
[ 0.080066] SELinux: Disabled at boot.
[ 0.080069] Capability LSM initialized
[ 0.080295] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.081137] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.081511] Mount-cache hash table entries: 256
[ 0.081651] Initializing cgroup subsys ns
[ 0.081655] Initializing cgroup subsys cpuacct
[ 0.081673] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.081676] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.081678] CPU 0/0 -> Node 0
[ 0.081680] CPU: Physical Processor ID: 0
[ 0.081681] CPU: Processor Core ID: 0
[ 0.082327] ACPI: Core revision 20070126
[ 0.132999] Using local APIC timer interrupts.
[ 0.136015] APIC timer calibration result 12557904
[ 0.136017] Detected 12.557 MHz APIC timer.
[ 0.136155] Booting processor 1/4 APIC 0x1
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4219.70 BogoMIPS (lpj=8439413)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 1/1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] Quad-Core AMD Opteron(tm) Processor 1352 stepping 03
[ 0.224421] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.228101] Booting processor 2/4 APIC 0x2
[ 0.004000] Initializing CPU#2
[ 0.004000] Calibrating delay using timer specific routine.. 4219.56 BogoMIPS (lpj=8439138)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 2/2 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 2
[ 0.004000] Quad-Core AMD Opteron(tm) Processor 1352 stepping 03
[ 0.316394] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.320107] Booting processor 3/4 APIC 0x3
[ 0.004000] Initializing CPU#3
[ 0.004000] Calibrating delay using timer specific routine.. 4219.57 BogoMIPS (lpj=8439146)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 3/3 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 3
[ 0.004000] Quad-Core AMD Opteron(tm) Processor 1352 stepping 03
[ 0.408372] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.412054] Brought up 4 CPUs
[ 0.412233] CPU0 attaching sched-domain:
[ 0.412235] domain 0: span 0000000f
[ 0.412237] groups: 00000001 00000002 00000004 00000008
[ 0.412242] domain 1: span 0000000f
[ 0.412243] groups: 0000000f
[ 0.412246] CPU1 attaching sched-domain:
[ 0.412247] domain 0: span 0000000f
[ 0.412249] groups: 00000002 00000004 00000008 00000001
[ 0.412252] domain 1: span 0000000f
[ 0.412254] groups: 0000000f
[ 0.412256] CPU2 attaching sched-domain:
[ 0.412258] domain 0: span 0000000f
[ 0.412259] groups: 00000004 00000008 00000001 00000002
[ 0.412263] domain 1: span 0000000f
[ 0.412264] groups: 0000000f
[ 0.412267] CPU3 attaching sched-domain:
[ 0.412268] domain 0: span 0000000f
[ 0.412270] groups: 00000008 00000001 00000002 00000004
[ 0.412273] domain 1: span 0000000f
[ 0.412275] groups: 0000000f
[ 0.412539] net_namespace: 1016 bytes
[ 0.412543] Booting paravirtualized kernel on bare hardware
[ 0.412759] NET: Registered protocol family 16
[ 0.412848] ACPI: bus type pci registered
[ 0.413215] PCI: Using MMCONFIG at e0000000 - e04fffff
[ 0.413217] PCI: Using configuration type 1
[ 0.414013] ACPI: EC: Look up EC in DSDT
[ 0.418631] ACPI: Interpreter enabled
[ 0.418633] ACPI: (supports S0 S4 S5)
[ 0.418645] ACPI: Using IOAPIC for interrupt routing
[ 0.423244] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.424338] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.424423] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 0.424459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
[ 0.424485] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
[ 0.424517] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
[ 0.424549] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR3._PRT]
[ 0.443046] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0
[ 0.443220] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0
[ 0.443399] ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0, disabled.
[ 0.443583] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0, disabled.
[ 0.443760] ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled.
[ 0.444164] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0
[ 0.444347] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0
[ 0.444524] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0, disabled.
[ 0.444707] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[ 0.444890] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[ 0.445074] ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled.
[ 0.445256] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled.
[ 0.445445] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0
[ 0.445635] ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0
[ 0.445824] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 0.446447] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.446462] pnp: PnP ACPI init
[ 0.446469] ACPI: bus type pnp registered
[ 0.446598] 00:00: calling quirk 0xffffffff8035ba3a: quirk_system_pci_resources+0x0/0x173()
[ 0.446636] pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.446803] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.446849] 00:02: calling quirk 0xffffffff8035ba3a: quirk_system_pci_resources+0x0/0x173()
[ 0.446885] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.447213] 00:03: calling quirk 0xffffffff8035ba3a: quirk_system_pci_resources+0x0/0x173()
[ 0.447255] pnp 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.447390] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.447404] 00:05: calling quirk 0xffffffff8035ba3a: quirk_system_pci_resources+0x0/0x173()
[ 0.447440] pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.447478] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.447512] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.447593] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.447629] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.447640] 00:0a: calling quirk 0xffffffff8035ba3a: quirk_system_pci_resources+0x0/0x173()
[ 0.447674] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.448358] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.449269] pnp: PnP ACPI: found 12 devices
[ 0.449271] ACPI: ACPI bus type pnp unregistered
[ 0.449372] usbcore: registered new interface driver usbfs
[ 0.449399] usbcore: registered new interface driver hub
[ 0.449425] usbcore: registered new device driver usb
[ 0.449490] PCI: Using ACPI for IRQ routing
[ 0.449493] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.472045] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.472045] hpet0: 3 32-bit timers, 25000000 Hz
[ 0.472045] ACPI: RTC can wake from S4
[ 0.488049] pnp: the driver 'system' has been registered
[ 0.488049] system 00:00: iomem range 0xffc00000-0xffffffff could not be reserved
[ 0.488049] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.488049] system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 0.488049] system 00:00: iomem range 0xfed00000-0xfed00fff has been reserved
[ 0.488049] system 00:00: driver attached
[ 0.488049] system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.488049] system 00:02: driver attached
[ 0.488049] system 00:03: ioport range 0x8000-0x807f has been reserved
[ 0.488049] system 00:03: ioport range 0x8080-0x80ff has been reserved
[ 0.488049] system 00:03: ioport range 0x8400-0x847f has been reserved
[ 0.488049] system 00:03: ioport range 0x8480-0x84ff has been reserved
[ 0.488049] system 00:03: ioport range 0x8800-0x887f has been reserved
[ 0.488049] system 00:03: ioport range 0x8880-0x88ff has been reserved
[ 0.488049] system 00:03: ioport range 0x2040-0x207f has been reserved
[ 0.488049] system 00:03: ioport range 0x2000-0x203f has been reserved
[ 0.488049] system 00:03: driver attached
[ 0.488049] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 0.488049] system 00:05: driver attached
[ 0.488049] system 00:0a: ioport range 0xc00-0xc7f has been reserved
[ 0.488049] system 00:0a: driver attached
[ 0.488274] PCI: Bridge: 0000:00:09.0
[ 0.488274] IO window: 3000-3fff
[ 0.488274] MEM window: 0xd0100000-0xd01fffff
[ 0.488274] PREFETCH window: 0x00000000d8000000-0x00000000dfffffff
[ 0.488274] PCI: Bridge: 0000:00:0b.0
[ 0.488274] IO window: disabled.
[ 0.488274] MEM window: 0xd0200000-0xd02fffff
[ 0.488274] PREFETCH window: disabled.
[ 0.488274] PCI: Bridge: 0000:00:0c.0
[ 0.488274] IO window: disabled.
[ 0.488274] MEM window: disabled.
[ 0.488274] PREFETCH window: disabled.
[ 0.488274] PCI: Bridge: 0000:00:0d.0
[ 0.488274] IO window: disabled.
[ 0.488274] MEM window: disabled.
[ 0.488274] PREFETCH window: disabled.
[ 0.488274] PCI: Bridge: 0000:00:0e.0
[ 0.488274] IO window: disabled.
[ 0.488274] MEM window: disabled.
[ 0.488274] PREFETCH window: disabled.
[ 0.488274] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 0.488274] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 0.488274] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 0.488274] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 0.488274] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 0.488274] NET: Registered protocol family 2
[ 0.088625] Switched to high resolution mode on CPU 3
[ 0.216401] Switched to high resolution mode on CPU 2
[ 0.324334] Switched to high resolution mode on CPU 1
[ 0.504286] Switched to high resolution mode on CPU 0
[ 0.532292] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.532292] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.532292] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.532292] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.532292] TCP reno registered
[ 0.548297] checking if image is initramfs... it is
[ 0.961187] Freeing initrd memory: 6044k freed
[ 0.963472] Simple Boot Flag at 0x62 set to 0x1
[ 0.965664] audit: initializing netlink socket (disabled)
[ 0.965676] type=2000 audit(1217306642.964:1): initialized
[ 0.965915] Total HugeTLB memory allocated, 0
[ 0.966064] VFS: Disk quotas dquot_6.5.1
[ 0.966096] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.966195] io scheduler noop registered
[ 0.966197] io scheduler anticipatory registered
[ 0.966199] io scheduler deadline registered
[ 0.966215] io scheduler cfq registered (default)
[ 0.966229] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 0.966290] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 0.966299] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 0.966310] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 0.966317] pci 0000:00:0b.0: Found enabled HT MSI Mapping
[ 0.966320] pci 0000:00:0b.0: Linking AER extended capability
[ 0.966328] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 0.966334] pci 0000:00:0c.0: Found enabled HT MSI Mapping
[ 0.966336] pci 0000:00:0c.0: Linking AER extended capability
[ 0.966344] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 0.966349] pci 0000:00:0d.0: Found enabled HT MSI Mapping
[ 0.966352] pci 0000:00:0d.0: Linking AER extended capability
[ 0.966359] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 0.966364] pci 0000:00:0e.0: Found enabled HT MSI Mapping
[ 0.966366] pci 0000:00:0e.0: Linking AER extended capability
[ 0.966374] pci 0000:01:08.0: Boot video device
[ 0.966485] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 0.966502] assign_interrupt_mode Found MSI capability
[ 0.966520] Allocate Port Service[0000:00:0b.0:pcie00]
[ 0.966557] Allocate Port Service[0000:00:0b.0:pcie01]
[ 0.966592] Allocate Port Service[0000:00:0b.0:pcie03]
[ 0.966651] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 0.966666] assign_interrupt_mode Found MSI capability
[ 0.966679] Allocate Port Service[0000:00:0c.0:pcie00]
[ 0.966717] Allocate Port Service[0000:00:0c.0:pcie01]
[ 0.966752] Allocate Port Service[0000:00:0c.0:pcie03]
[ 0.966810] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 0.966825] assign_interrupt_mode Found MSI capability
[ 0.966837] Allocate Port Service[0000:00:0d.0:pcie00]
[ 0.966873] Allocate Port Service[0000:00:0d.0:pcie01]
[ 0.966909] Allocate Port Service[0000:00:0d.0:pcie03]
[ 0.966965] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 0.966980] assign_interrupt_mode Found MSI capability
[ 0.966992] Allocate Port Service[0000:00:0e.0:pcie00]
[ 0.967026] Allocate Port Service[0000:00:0e.0:pcie01]
[ 0.967064] Allocate Port Service[0000:00:0e.0:pcie03]
[ 0.968293] AER service couldn't init device 0000:00:0b.0:pcie01 - no _OSC support
[ 0.968855] AER service couldn't init device 0000:00:0c.0:pcie01 - no _OSC support
[ 0.969959] AER service couldn't init device 0000:00:0d.0:pcie01 - no _OSC support
[ 0.971059] AER service couldn't init device 0000:00:0e.0:pcie01 - no _OSC support
[ 0.973794] Real Time Clock Driver v1.12ac
[ 0.973942] hpet_resources: 0xfed00000 is busy
[ 0.974001] Linux agpgart interface v0.103
[ 0.974003] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 0.974119] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.974335] pnp: the driver 'serial' has been registered
[ 0.974530] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.974572] serial 00:0b: driver attached
[ 0.975383] brd: module loaded
[ 0.975455] input: Macintosh mouse button emulation as /class/input/input0
[ 0.975552] pnp: the driver 'i8042 kbd' has been registered
[ 0.975588] pnp: the driver 'i8042 aux' has been registered
[ 0.975655] pnp: the driver 'i8042 kbd' has been unregistered
[ 0.975687] pnp: the driver 'i8042 aux' has been unregistered
[ 0.975690] PNP: No PS/2 controller found. Probing ports directly.
[ 0.978351] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.978364] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.004419] mice: PS/2 mouse device common for all mice
[ 1.004438] cpuidle: using governor ladder
[ 1.004438] cpuidle: using governor menu
[ 1.004438] TCP cubic registered
[ 1.004438] NET: Registered protocol family 1
[ 1.004438] NET: Registered protocol family 17
[ 1.004492] registered taskstats version 1
[ 1.004492] Freeing unused kernel memory: 372k freed
[ 1.085420] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.085469] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.085474] ACPI: Processor [C000] (supports 2 throttling states)
[ 1.085536] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.085552] ACPI: ACPI0007:02 is registered as cooling_device2
[ 1.085552] ACPI: ACPI0007:03 is registered as cooling_device3
[ 0.807371] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.807664] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23
[ 0.807671] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 23 (level, low) -> IRQ 23
[ 0.807682] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.807685] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.807804] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 0.807820] ohci_hcd 0000:00:02.0: irq 23, io mem 0xd0000000
[ 0.833403] Uniform Multi-Platform E-IDE driver
[ 0.833407] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 0.865189] usb usb1: configuration #1 chosen from 1 choice
[ 0.865212] hub 1-0:1.0: USB hub found
[ 0.865221] hub 1-0:1.0: 10 ports detected
[ 0.915046] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.915050] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.915052] usb usb1: Product: OHCI Host Controller
[ 0.915054] usb usb1: Manufacturer: Linux 2.6.25-2-amd64 ohci_hcd
[ 0.915056] usb usb1: SerialNumber: 0000:00:02.0
[ 1.159354] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
[ 1.159354] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 22 (level, low) -> IRQ 22
[ 1.159354] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 1.159354] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.159417] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 1.159440] ehci_hcd 0000:00:02.1: debug port 1
[ 1.159444] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 1.159455] ehci_hcd 0000:00:02.1: irq 22, io mem 0xd0001000
[ 1.175360] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.175444] usb usb2: configuration #1 chosen from 1 choice
[ 1.175465] hub 2-0:1.0: USB hub found
[ 1.175472] hub 2-0:1.0: 10 ports detected
[ 1.203409] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.203412] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.203414] usb usb2: Product: EHCI Host Controller
[ 1.203416] usb usb2: Manufacturer: Linux 2.6.25-2-amd64 ehci_hcd
[ 1.203418] usb usb2: SerialNumber: 0000:00:02.1
[ 1.048431] tg3.c:v3.91 (April 18, 2008)
[ 1.048431] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 19
[ 1.048431] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNK2] -> GSI 19 (level, low) -> IRQ 19
[ 1.048431] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 1.068827] eth0: Tigon3 [partno(BCM95722) rev a200 PHY(5722/5756)] (PCI Express) 10/100/1000Base-T Ethernet 00:1e:c9:56:82:33
[ 1.068832] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 1.068834] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 0.964725] No dock devices found.
[ 0.969742] SCSI subsystem initialized
[ 0.975249] libata version 3.00 loaded.
[ 0.978962] sata_nv 0000:00:07.0: version 3.5
[ 0.978982] PCI: Enabling device 0000:00:07.0 (0005 -> 0007)
[ 0.979305] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21
[ 0.979311] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 21 (level, low) -> IRQ 21
[ 0.979315] sata_nv 0000:00:07.0: Using ADMA mode
[ 0.979349] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 0.979451] scsi0 : sata_nv
[ 0.979512] scsi1 : sata_nv
[ 0.979626] ata1: SATA max UDMA/133 cmd 0x20f0 ctl 0x20e0 bmdma 0x20b0 irq 21
[ 0.979628] ata2: SATA max UDMA/133 cmd 0x20d0 ctl 0x20c0 bmdma 0x20b8 irq 21
[ 1.355378] hub 2-0:1.0: unable to enumerate USB device on port 4
[ 1.367384] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.026970] ata1.00: ATA-7: WDC WD800AAJS-18TDA1, 01.00A04, max UDMA/133
[ 1.026970] ata1.00: 156250000 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.027172] ata1.00: configured for UDMA/133
[ 1.379376] hub 2-0:1.0: unable to enumerate USB device on port 6
[ 1.467379] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.034971] scsi 0:0:0:0: Direct-Access ATA WDC WD800AAJS-18 01.0 PQ: 0 ANSI: 5
[ 1.034971] ata1: DMA mask 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 1.034971] ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 20
[ 1.034971] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSI1] -> GSI 20 (level, low) -> IRQ 20
[ 1.034971] sata_nv 0000:00:08.0: Using ADMA mode
[ 1.034971] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 1.034971] scsi2 : sata_nv
[ 1.034971] scsi3 : sata_nv
[ 1.034971] ata3: SATA max UDMA/133 cmd 0x2440 ctl 0x2430 bmdma 0x2400 irq 20
[ 1.034971] ata4: SATA max UDMA/133 cmd 0x2420 ctl 0x2410 bmdma 0x2408 irq 20
[ 1.499380] usb 1-4: new full speed USB device using ohci_hcd and address 2
[ 1.090975] usb 1-4: configuration #1 chosen from 1 choice
[ 1.093121] hub 1-4:1.0: USB hub found
[ 1.096093] hub 1-4:1.0: 3 ports detected
[ 1.139036] usb 1-4: New USB device found, idVendor=0472, idProduct=0065
[ 1.139039] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.139041] usb 1-4: Product: Generic USB Hub
[ 1.139042] usb 1-4: Manufacturer: Chicony
[ 1.607392] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.615482] ata3.00: ATAPI: PLDS DVD-ROM DH-16D3S, SD11, max UDMA/100
[ 1.214994] usb 1-6: new low speed USB device using ohci_hcd and address 3
[ 1.627482] ata3.00: configured for UDMA/100
[ 1.258985] usb 1-6: configuration #1 chosen from 1 choice
[ 1.259174] usb 1-6: New USB device found, idVendor=046d, idProduct=c50a
[ 1.259177] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.259179] usb 1-6: Product: USB Receiver
[ 1.259181] usb 1-6: Manufacturer: Logitech
[ 1.719397] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.324392] scsi 2:0:0:0: CD-ROM PLDS DVD-ROM DH-16D3S SD11 PQ: 0 ANSI: 5
[ 1.324401] ata3: DMA mask 0xFFFFFFFF, segment boundary 0xFFFF, hw segs 127
[ 1.327226] usb 1-4.1: new full speed USB device using ohci_hcd and address 4
[ 1.731158] Driver 'sd' needs updating - please use bus_type methods
[ 1.731243] sd 0:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB)
[ 1.731255] sd 0:0:0:0: [sda] Write Protect is off
[ 1.731258] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.731280] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.731330] sd 0:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB)
[ 1.731338] sd 0:0:0:0: [sda] Write Protect is off
[ 1.731341] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.731355] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.731358] sda: sda1 sda2 sda3 sda4 <<4>Driver 'sr' needs updating - please use bus_type methods
[ 1.355141] sda5 sda6 >
[ 1.365369] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.611325] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 1.611330] Uniform CD-ROM driver Revision: 3.20
[ 1.611385] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.617801] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.617823] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.439213] usb 1-4.1: configuration #1 chosen from 1 choice
[ 1.445182] usb 1-4.1: New USB device found, idVendor=0472, idProduct=0065
[ 1.445185] usb 1-4.1: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[ 1.445188] usb 1-4.1: Product: PFU-65 USB Keyboard
[ 1.445189] usb 1-4.1: Manufacturer: Chicony
[ 1.845544] usbcore: registered new interface driver hiddev
[ 1.458291] input: Logitech USB Receiver as /class/input/input1
[ 1.479069] input,hidraw0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-6
[ 1.483299] input: Chicony PFU-65 USB Keyboard as /class/input/input2
[ 1.503036] input,hidraw1: USB HID v1.00 Keyboard [Chicony PFU-65 USB Keyboard] on usb-0000:00:02.0-4.1
[ 1.503052] usbcore: registered new interface driver usbhid
[ 1.503055] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 1.474844] PM: Starting manual resume from disk
[ 1.997244] kjournald starting. Commit interval 5 seconds
[ 1.635854] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.366718] udevd version 124 started
[ 2.523722] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 2.591089] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.592813] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.705504] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2040
[ 2.705520] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2000
[ 2.687655] input: Power Button (FF) as /class/input/input3
[ 2.743134] ACPI: Power Button (FF) [PWRF]
[ 2.743233] input: Power Button (CM) as /class/input/input4
[ 2.807864] input: PC Speaker as /class/input/input5
[ 2.807890] ACPI: Power Button (CM) [PWRB]
[ 2.871761] pnp: the driver 'rtc_cmos' has been registered
[ 2.871780] rtc_cmos 00:08: disabling not supported
[ 2.871785] rtc_cmos: probe of 00:08 failed with error -16
[ 3.784833] Adding 4883720k swap on /dev/sda5. Priority:-1 extents:1 across:4883720k
[ 3.886747] EXT3 FS on sda3, internal journal
[ 4.698661] loop: module loaded
[ 4.072620] kjournald starting. Commit interval 5 seconds
[ 4.891213] EXT3 FS on sda6, internal journal
[ 4.891213] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.702427] NET: Registered protocol family 10
[ 6.702924] lo: Disabled Privacy Extensions
[ 6.703352] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.307055] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 8.051412] tg3: eth0: Link is up at 1000 Mbps, full duplex.
[ 8.051412] tg3: eth0: Flow control is off for TX and off for RX.
[ 8.051412] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready